Bistatic GPR by Using an Optical Electric Field Sensor

摘要

In order to apply to land mine detection effectively, bistatic GPR using an optical electric field sensor as a receiver has been developed. The optical electric field sensor is very small and uses optical fiber instead of metallic coaxial cable. With the combination of these advantages and the bistatic radar system, it can be possible for an operator to measure quite flexible and safely. The sensor has been tested in stepped frequency radar system with frequency which consists of a vector network analyzer, a fixed double ridged horn antenna as transmitter and computer controlled receiver- positioner for 2D scanning. For considering effectiveness in real field, we applied impulse radar system, which consist of a digital oscilloscope and a impulse generator to produce the impulse with 250 psec pulse width and the diffraction stacking has been adopted for 3D image reconstruction. Detection of a PMN2 mine model was carried out by the impulse radar system at a sand pit with two modes of data acquisition: the stepped data acquisition and the continuous data acquisition. The PMN2 were detected clearly with sufficiently high resolution in TM mode measurement in both modes, the target contrast was almost the same while the scanning time decreased down to 1/18, 9 min/m(square) in case of continuous data acquisition mode which satisfies the requirement for practical use.