Influence of Wind Tunnel Noise on the Location of Boundary-Layer Transition on a Slender Cone at Mach Numbers from 0.2 to 5.5. Volume II. Tabulated and Plotted Data

摘要

A study was conducted to investigate the effects of wind tunnel test section noise on the location of boundary-layer transition. The study was carried out by conducting experiments on a slender, highly polished cone with an included angle of 10 deg. Wind tunnel test section noise was measured by microphones flush-mounted on the cone surface. In most of the experiments, boundary-layer transition was measured with a surface-mounted, traversing pitot pressure probe. The experiments were conducted in 23 different subsonic, transonic, and supersonic wind tunnels over a Mach number range from 0.2 to 5.5 and a unit Reynolds number range from 1.0 to 7.0 million per foot, the bulk of the data being obtained between 2.0 and 4.0 million per foot. The results show an influence of wind tunnel noise on boundary-layer transition for most of the wind tunnels. (Author)