首页>外文期刊>International Journal of Engineering Systems Modelling and Simulation

International Journal of Engineering Systems Modelling and Simulation

中文名称：国际工程系统杂志》上建模和仿真

ISSN：1755-9758
出版周期：Quarterly

发文量：167

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Evaluation of the effects of melting phenomenon on the residual stress formation in ferritic pipeline multi pass girth-weld joints

机译：熔融现象对铁素体管线多道环缝焊接接头残余应力形成的影响评估
- 作者：Djarot B. Darmadi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第3期
- Melting;
- Annealing temperature;
- Residual stress;
- Ferritic steels;
- Coupled TMM analysis;
2.Parametric CFD studies on erosion in 3D double elbow

机译：3D双肘腐蚀的参数CFD研究
- 作者：Changjun Li;Qian Huang;Shikui Yan;Ting Huang
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第4期
- Computational fluid dynamics;
- CFD;
- Solid particle;
- Erosion;
- Double elbow;
- Gas-solid flow;
- Numerical simulation;
3.Simulation of vibration signal generated by a defective rolling element bearing

机译：模拟滚动轴承故障产生的振动信号
- 作者：D. Paliwal;A. Choudhury;T. Govardhan
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第4期
- Simulation;
- Rolling element bearing;
- Frequency spectrum;
4.A real-time acoustic signature-based fluid identification methodology for applications in the field of security and defence

机译：基于实时声学签名的流体识别方法，用于安全和防御领域
- 作者：Shweta Singh;Dipali Bansal
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第4期
- Real-time acquisition;
- Acoustic signatures;
- Resonance;
- Spectroscopy;
- Piezoelectric sensors;
- Container screening;
5.Creeping flow with non-uniform viscosity in a permeable industrial conduct

机译：渗透性工业行为中粘度不均匀的蠕变流
- 作者：Jacques Hona;Elisabeth Ngo Nyobe;Elkana Pemha
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第3期
6.Discrete-time modelling and behaviour analysis of an N-cell DC/DC buck converter

机译：N单元DC / DC降压转换器的离散时间建模和行为分析
- 作者：Karama Koubaa;Moez Feki
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第1期
- Multi-cell converters;
- DC/DC buck converter;
- Discrete model;
- Proportional controller;
- Chaotic behaviour;
7.Development of a three-dimensional icing simulation code in the NSMB flow solver

机译：在NSMB流量求解器中开发三维结冰仿真代码
- 作者：Dorian Pena;Yannick Hoarau;Eric Laurendeau
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第2期
- Aircraft icing;
- Eulerian droplet transport equations;
- Icing effect;
8.An ensemble Kalman filtering algorithm for state estimation of jump Markov systems

机译：跳跃马尔可夫系统状态估计的集成卡尔曼滤波算法
- 作者：S. Vasuhi;V. Vaidehi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第1期
- Ensemble Kalman filter;
- EnKF;
- State estimation;
- Jump Markov systems;
- Modelling;
9.Minimum bias metamodels in engineering system design

机译：工程系统设计中的最小偏差元模型
- 作者：Husam Hamad;Mohammed T. Simsim;Awad Al-Zaben;Rami J. Oweis
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第3期
- Experimental design;
- Minimum bias design;
- MBD;
- Response surface models;
- RSMs;
10.Sliding mode control for photovoltaic water pumping system based on support vector machines

机译：基于支持向量机的光伏水泵系统滑模控制
- 作者：Omar Dahhani;Bouchra Sefriti;Abdessalam El-Jouni;Ismail Boumhidi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第4期
- Photovoltaic pumping system;
- Maximum power point;
- MPP;
- Sliding mode control;
- SMC;
- Support vector machines;
- SVMs;
11.Network modelling and prediction of retrograde gas behaviour in natural gas pipeline systems

机译：天然气管道系统中逆行气体行为的网络建模和预测
- 作者：Tianying Jin;Luis F. Ayala H.;M. Thaddeus Ityokumbul
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第3期
- Retrograde gas;
- Pipeline;
- Multiphase flow;
- T-junction split;
- Phase behaviour;
12.Multi-body modelling of single-mast stacker cranes

机译：单桅堆高机的多体建模
- 作者：Sandor Hajdu;Peter Gaspar
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第3期
- Multi-body modelling;
- Modal superposition;
- Modal truncation;
- Stacker cranes;
- Proportional damping;
- Dynamic modelling;
13.Pipeline lateral gas flow modelling and impedance matching

机译：管道侧向气流建模和阻抗匹配
- 作者：Robert Whalley;Alaa Abdul-Ameer
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第1期
- Gas;
- Pipeline;
- Input;
- Exit;
- Impedances;
14.Dynamic soaring mechanisms in the ocean boundary layer

机译：海洋边界层的动态腾飞机制
- 作者：Vincent Bonnin;Emmanuel Benard;Christine A. Toomer;Jean-Marc Moschetta
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第2期
- Albatross;
- Dynamic soaring;
- Optimisation;
- UAV;
- Wind gradient;
- Idealised wave;
- Wave soaring;
- Ocean;
- Boundary layer;
15.Aircraft suitability model applied to a laminar flow control flight experiment

机译：飞机适用性模型在层流控制飞行实验中的应用
- 作者：Aaron A. Tucker;Helen L. Reed;William S. Saric
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第3期
16.Order reduction of MIMO ARX systems using Laguerre bases

机译：使用Laguerre基的MIMO ARX系统的降阶
- 作者：Ameni El Anes;Saber Maraoui;Kais Bouzrara
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第4期
- Parameter reduction;
- MIMO coupled systems;
- Laguerre functions;
- Pole optimisation;
17.Modelling and optimisation of creep feed deep surface grinding using FEM-based NNGA

机译：基于基于FEM的NNGA的蠕动进给深表面磨削的建模和优化
- 作者：Audhesh Narayan;Vinod Yadava
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第1期
- Creep feed deep surface grinding;
- CFDSG;
- Thermal stress;
- Finite element method;
- FEM;
- Neural network;
- Genetic algorithm;
18.New power factor correction technique in switched reluctance motor drive using PWM converter

机译：使用PWM转换器的开关磁阻电机驱动中的新功率因数校正技术
- 作者：Mahavir Singh Naruka;S. N. Singh
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2015年第3期
- Midpoint converter;
- Power quality;
- Total harmonics distortion;
- THD;
- PFC;
- Switched reluctance motor;
- SRM;
- Pulse width modulation;
- PWM converter;
19.Competent realisation of cooperative spectrum sensing in cognitive radio systems

机译：认知无线电系统中协作频谱感知的能力实现
- 作者：S. Pavithra;S. Karthikeyan;V. J. K. Kishor Sonti;S. Jayashri
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2015年第2期
- Cognitive radio syatems;
- FFT;
- Spectrum sensing;
- Energy detection;
- Fusion centre;
20.Automatic modelling of complex geometries for MCNP simulation using GEOMIT code

机译：使用GEOMIT代码为MCNP仿真自动建模复杂几何
- 作者：Noha Shaaban;Wael El Gammal;Hesham Nasif;Hidetsugu Morota
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2015年第3期
- MCNP-CAD interface;
- GEOMIT;
- Solid geometry;
- Visualisation;
21.Validation of brain connectivity analysis using fMRI simulation

机译：使用fMRI模拟验证大脑连接性分析
- 作者：Shamil M. Hadi;Mohammad-Reza Siadat;Abbas Babajani-Feremi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2015年第4期
- Simulation;
- Euler method;
- Difference equation;
- Balloon model;
- SPM;
- Dynamic causal modelling;
- DCM;
- Hemodynamic model;
- Neuronal model;
22.Online fault detection strategy applied to a binary component distillation

机译：在线故障检测策略应用于二元组分精馏
- 作者：Yahya Chetouani
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2015年第2期
- Reliability;
- Anomaly detection;
- Normal behaviour;
- Modelling;
- Neural network;
- Distillation;
23.Experimental use of electronic nose for odour detection

机译：电子鼻用于气味检测的实验用途
- 作者：Vishal Sharma;P. C. Panchariya
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2015年第4期
- Electronic nose;
- PCA;
- Volatile organic compound;
- VOC;
- Simulation;
- Pattern recognition;
- Unsupervised technique;
- KNN;
- ICA;
- SVM;
24.Evaluation of scale-adaptive simulation for transonic cavity flows

机译：跨音速腔流的尺度自适应仿真评估
- 作者：Savio V. Babu;George Zografakis;George N. Barakos;Alexander Kusyumov
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第2期
- Aerodynamics;
- Transonic cavity flow;
- Computational fluid dynamics;
- CFD;
- Detached-eddy simulation;
- DES;
- Scale-adaptive simulation;
- SAS;
- Proper orthogonal decomposition;
- POD;
25.Characterisations of force and pressure fluctuations of real vehicles

机译：真实车辆的力和压力波动的特征
- 作者：O. Cadot;A. Courbois;D. Ricot;T. Ruiz;F. Harambat;V. Herbert;R. Vigneron;J. Delery
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第2期
- Road vehicle aerodynamics;
- Separated flows;
- Three-dimensional wake dynamics;
- Bistability;
- Full-scale experiments;
- Drag sources;
26.Icing test capabilities at DGA Aero-engine Testing

机译：DGA航空发动机测试的结冰测试功能
- 作者：Emilie Jerome;Franck Hervy;Severine Maguis
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第2期
- DGA Aero-engine Testing;
- Icing tests;
- Simulated flight conditions;
- Altitude test facility;
- ATF;
- Supercooled large droplets;
- SLD;
- Calibration;
- Aerofoil;
- Engine;
- Air intake;
- Computational fluid dynamics;
- CFD;
- Fluent;
- Aerodynamics;
27.Mathematical model for ice wall interactions within a level set method

机译：水平集方法中冰墙相互作用的数学模型
- 作者：Francois Morency;Heloise Beaugendre
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第2期
28.From the methanol to olefins: an operational assessment

机译：从甲醇到烯烃：运营评估
- 作者：Aaqil Ali;Vinita Manna;Kainean Lalchan;Carmen Riverol
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第2期
- Plant-wide;
- Methanol to olefins;
- MTO;
- Cascade control;
- Split control;
- Safety;
29.A novel soft sensor model for ball mill fill level using deep belief network and support vector machine

机译：基于深度置信网络和支持向量机的新型球磨机料位软传感器模型
- 作者：Gaowei Yan;Yan Kang;Mifeng Ren
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第4期
- Ball mill;
- Fill level;
- Deep belief network;
- DBN;
- Support vector machine;
- SVM;
30.Curvature effects on circular feed end-milling, part 2: stability analysis

机译：曲率对圆形进给立铣的影响，第2部分：稳定性分析
- 作者：C. G. Ozoegwu;S. N. Omenyi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第1期
- Chatter;
- End-milling;
- Delay differential equation;
- DDE;
- Full-discretisation method;
- Stability lobes;
31.Analysing the resilience of military supply network and simulation against disruptions

机译：分析军事物资供应网络的弹性并进行仿真以防干扰
- 作者：Qingzhong Zhou;Biao Xiong;Bixin Li;Jin Huang;Sixi Lu
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第3期
- Military supply network;
- Grow model;
- Resilience;
- Disruptions;
- Logistics defence;
- Systems modelling;
- Simulation;
32.Supply chain networks evolving model based on local economy regions

机译：基于地方经济区域的供应链网络演化模型
- 作者：Yong Liu;Yongrui Zhuang;Nan Lu
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第4期
- Supply chain networks;
- Local economy regions;
- Mutual attachment mechanism;
- Network evolution model;
- Complex network;
33.Multi-state systems reliability with composite importance measures of fuzzy petri nets

机译：模糊Petri网的复合重要性度量的多状态系统可靠性
- 作者：Xinju Zhang;Shuzhen Yao
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第4期
- Fuzzy petri nets;
- FPN;
- Multi-state;
- Composite importance measures;
- CIM;
- Adaptive fuzzy reasoning algorithm;
34.Numerical study of turbulent flow inside a spark ignition engine cylinder

机译：火花点火发动机气缸内湍流的数值研究
- 作者：J. A. Beauquel;S. S. Ibrahim;Rui Chen
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第1期
- Computer fluid dynamics;
- Numerical simulation;
- Model validation;
- Engine cylinder flow;
- Spark ignition valve timing;
35.Modelling, analysis and validation of wireless controller area network

机译：无线控制器局域网的建模，分析和验证
- 作者：Gerardine Immaculate Mary;Zachariah C. Alex
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2016年第1期
- Controller area network;
- CAN;
- Wireless controller area network;
- WCAN;
- Token frame;
- IEEE 802.11;
- Wireless token ring protocol;
- WTRP;
- Throughput;
- Packet delivery ratio;
- PDR;
- QualNet;
36.Application of vorticity confinement to rotor wake simulations

机译：涡度约束在转子尾流仿真中的应用
- 作者：Michel Costes;Thomas Renaud;Benoit Rodriguez;Gabriel Reboul
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第2期
- Helicopter rotor wake;
- Vorticity confinement;
- Hovering flight;
- Descent flight;
- Blade-vortex interaction;
37.Assessment of propeller 1P loads predictions

机译：螺旋桨1P载荷预测的评估
- 作者：Biel Ortun;Ronan Boisard;Ignacio Gonzalez-Martino
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第2期
- Propeller;
- Inflow angle;
- Incidence;
- 1P;
- URANS;
- Wind tunnel;
- Loads;
- In-plane;
- Balance;
- Corrections;
38.Numerical study of laminar natural convection of Cu-water nanofluid in concentric annuli with four radial fins

机译：四个径向鳍片同心环空中铜水纳米流体层流自然对流的数值研究
- 作者：G. A. Sheikhzadeh;M. Arbaban
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第3期
- Numerical simulation;
- Annuli;
- Nanofluid;
- Natural convection;
- Radial fin;
39.New airfoil families for horizontal-axis wind turbines

机译：用于水平轴风力发电机的新型翼型系列
- 作者：Mohammad Abdelrahman;Atef Hassanein
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第4期
- Low speed airfoils;
- Airfoil design;
- Horizontal-axis wind turbines;
- Wind energy;
40.Estimation of thermocouple measurement errors for the ceramic specimen surface temperature in thermal tests

机译：估算热测试中陶瓷样品表面温度的热电偶测量误差
- 作者：Gennadiy Sereda;Andrey Shulyakovskiy;Olivier Durieux
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第4期
- Rocket fairings;
- Construction ceramic;
- Thermal tests;
- Thermocouples;
- Methodological error;
- Heat conductivity;
- Mathematical model;
41.One-dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-based thermoelectrically controlled micronozzle

机译：基于MEMS的热电控制微喷嘴壁面横向传热的热电偶的一维分析
- 作者：Amar Hasan Hameed;Raed Kafafy;Moumen Idres
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第4期
- Thermoelement;
- Peltier effect;
- Micronozzle;
- Thermoelectricity;
- Thermoelectric cooler or devices;
- Micropropulsion;
- MEMS-based TE;
42.Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing

机译：锥形鼻压头锥角对轴向挤压铜管吸能变化的影响
- 作者：Qasim H. Shah;Hanis Naily;Nur Syuhada
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第4期
- Energy absorbed;
- Nose angle;
- LS Dyna;
43.Finite element investigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process

机译：影响单点增量成形工艺零件深度和壁厚的某些方面的有限元研究
- 作者：Salah B. M. Echrif;Meftah Hrairi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第4期
- Component;
- Incremental sheet forming;
- ISF;
- Finite element method;
- Ls-Dyna;
- Aluminium;
- Thickness distribution;
44.Installation impact on pusher CROR engine low speed performance and noise emission characteristics

机译：安装对推式CROR发动机低速性能和噪声排放特性的影响
- 作者：A. Stuermer;Jianping Yin
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第2期
- Contra-rotating open rotor;
- CROR;
- Installation effects;
- URANS;
- CAA;
- Rotor noise;
- Unsteady aerodynamics;
- Interaction tones;
- Multi-disciplinary simulation;
- 1P loads;
45.A fuzzy logic modified smith predictor for IPDT process control

机译：IPDT过程控制的模糊逻辑修正史密斯预测因子
- 作者：Hao Chen;Zoubir Zouaoui;Zheng Chen
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第3期
- Integral process;
- Dead-time;
- Smith predictor;
- Fuzzy logic;
46.Numerical simulation of three-dimensional dynamic motion of a standard NACA model in an impact problem

机译：冲击问题中标准NACA模型的三维动态运动的数值模拟
- 作者：Amir Hossein Nikseresht;Hossein Ghazizade-Ahsaee
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第4期
- Slamming force;
- 3D symmetric impact;
- Dynamic mesh;
- Dynamic equations;
- Volume of fluid;
- VOF;
47.Direct numerical simulation of helical vortices

机译：螺旋涡旋的直接数值模拟
- 作者：Ivan Delbende;Maurice Rossi;Benjamin Piton
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第2期
- Vortex dynamics;
- Vortex merging;
- Helical vortices;
- Navier-Stokes equations;
- Numerical simulation;
48.Wind turbine wake: a disturbance to wind resource in wind farms

机译：风力发电机尾流：对风电场中风资源的干扰
- 作者：Sandrine Aubrun
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2012年第2期
- Wind energy;
- Wind turbine;
- Wake;
- Turbulence;
- Physical modelling;
- Porous disc;
- Actuator disc concept;
- Atmospheric turbulence length scales;
- Atmospheric boundary layer;
- ABL;
- Wind resource assessment;
- Wind tunnel;
- Rotor;
49.Investigation of the laminar separation-induced transition on two low-pressure turbine rotor blades

机译：研究两个低压涡轮转子叶片上的层流分离引起的过渡
- 作者：Jayson Babajee;Tony Arts
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
- Low-pressure turbine;
- LPT;
- Laminar separation;
- Transition;
- Transition model;
- Freestream turbulence;
- Turbulence Reynolds number;
- Langtry;
- Menter;
50.Experimental and numerical study of flow around a wind turbine rotor

机译：风力发电机转子绕流的实验与数值研究
- 作者：Ivan Dobrev;Fawaz Massouh;Asif Memon
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
- Wind turbine;
- Wake;
- Particle image velocimetry;
- PIV;
51.Experimental and numerical investigations of pitch-plunging wing aerodynamics at low Reynolds number

机译：低雷诺数俯仰俯冲空气动力学的实验和数值研究
- 作者：Ralf Wokoeck;Rolf Radespiel;Hauke Ehlers;Robert Konrath
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
52.Study on the development of a fuzzy logic control electromagnetic actuated CVT system

机译：模糊逻辑控制电磁无级变速器系统开发研究
- 作者：Sazzad Bin Sharif;Ataur Rahman;A. K. M. Mohiuddin;Altab Hossain
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第4期
53.Boundary-layer instability and transition on a flared cone in a Mach 6 quiet wind tunnel

机译：Mach 6安静风洞中喇叭形锥的边界层不稳定性和过渡
- 作者：Jerrod Hofferth;William Saric;Joseph Kuehl;Eduardo Perez;Travis Kocian;Helen Reed
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
54.Convergence behaviours of genetic algorithms for aerodynamic optimisation problems

机译：气动优化问题遗传算法的收敛性
- 作者：Paola Cinnella;Pietro Marco Congedo
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第4期
- Transonic aerodynamics;
- Shape optimisation;
- Genetic algorithm;
- GA-hardness;
- Numerical errors;
55.Numerical simulation and wind tunnel measurements on a tricycle wheel sub-system

机译：三轮车车轮子系统的数值模拟和风洞测量
- 作者：Thomas Driant;Hachimi Fellouah;Stephane Moreau;Alain Desrochers;Lakhdar Remaki
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
- Vehicle drag;
- Aerodynamics;
- Turbulent models;
- Mesh optimisation;
- Wind tunnel measurements;
- CFD;
56.Collaborative numerical simulation of hot gas flow over turbine blade using C-Denton method and comparison with Delaval nozzle

机译：基于C-Denton方法的涡轮叶片上方热气流的协同数值模拟以及与Delaval喷嘴的比较
- 作者：Morteza Mohammadi;Masoud Ziabasharhagh;Majid Nademi;Mostafa Mohammadi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第4期
- Turbine blade;
- Numerical simulation;
- C-Denton method;
- Delaval nozzle;
- Inviscid flow;
57.Two-dimensional flow properties of micronozzle under varied isothermal wall conditions

机译：等温壁面条件下微喷嘴的二维流动特性
- 作者：Amar Hasan Hameed;Raed Kafafy;Waqar Asrar;Moumen Idres
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第4期
- Thermoelement;
- Micro nozzle;
- Low-Reynolds-number;
- Micropropulsion;
- MEMS;
- Thermoelectricity;
58.Three-dimensional vibration analysis of a finite cylinder using the generalised differential quadrature method

机译：有限圆柱的三维振动分析的广义差分正交方法
- 作者：Reza Teymoori Faal;Behnam Ghalamchi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第4期
- Navier's equations;
- Finite cylinder;
- Generalised differential quadrature method;
- Natural frequency;
59.Gustave Eiffel, a pioneer of aerodynamics

机译：空气动力学的先驱古斯塔夫·埃菲尔（Gustave Eiffel）
- 作者：Bruno Chanetz;Martin Peter
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
- Eiffel wind tunnel;
- Diffuser;
- Laminar regime;
- Turbulent regime;
- Transition;
- Drag of the sphere;
- Eiffel chamber;
60.Design and modelling of silicon MEMS accelerometer

机译：硅MEMS加速度计的设计与建模
- 作者：Meftah Hrairi;Badrul Hanafi Bin Baharom
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第4期
- Component;
- Micro electro mechanical systems;
- MEMS;
- Finite element analysis;
- FEA;
- Accelerometer;
- Design;
- Modelling;
61.Transition control by micron-sized roughness elements: stability analyses and wind tunnel experiments

机译：通过微米级粗糙度元素进行的过渡控制：稳定性分析和风洞实验
- 作者：Olivier Vermeersch;Daniel Arnal;Itham Salah El Din
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
62.Evaluation of RANS/actuator disk modelling of wind turbine wake flow using wind tunnel measurements

机译：使用风洞测量评估风机尾流的RANS /执行器盘模型
- 作者：Jonathon Sumner;Guillaume Espana;Christian Masson;Sandrine Aubrun
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
- Wind turbine wake;
- Turbulence modelling;
- Wind tunnel;
- Computational fluid dynamics;
- Actuator disk;
63.Computation validation on lateral jet interactions at supersonic speeds

机译：超音速侧向射流相互作用的计算验证
- 作者：Patrick Gnemmi;Patrick Gruhn;Michel Leplat;Christophe Nottin;Stefan Wallin
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
- Missile;
- Lateral jet;
- Hot-gas jet;
- Cold-air jet;
- Aerodynamics;
- Numerical simulation;
- RANS computation;
- Numerical results;
- Experimental results;
64.Computational and experimental results in the open test section of the aeroacoustic windtunnel Braunschweig

机译：空气声学风洞不伦瑞克的开放测试部分的计算和实验结果
- 作者：Vlad Ciobaca;Michael Pott-Pollenske;Stefan Melber-Wilkending;Georg Wichmann
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
65.Self-adaptive control of a bluff body wake by means of porous flaps

机译：通过多孔皮瓣的钝体尾流自适应控制
- 作者：A. Feuvrier;N. Mazellier;A. Kourta
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
- Aerodynamics;
- Bluff body;
- Drag reduction;
- Biomimetic;
- Self-adaptive flow control;
- Passive flow control;
- Flow separation;
66.Simulation and model support correction for slotted wall transonic wind tunnels

机译：缝隙式跨音速风洞的仿真与模型支持修正
- 作者：Alexander Heidebrecht
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
67.Tandem nozzle supersonic wind tunnel design

机译：串联喷嘴超音速风洞设计
- 作者：Jie Wu;Rolf Radespiel
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2013年第3期
- Wind tunnel design;
- Numerical simulation;
- Nozzle design;
- Tandem nozzle;
- Supersonic flow;
68.Body scanning oriented 3D object modelling method based on multi-view depth camera

机译：基于多视图深度相机的体扫描面向3D对象建模方法
- 作者：Ping Xu;Fengjun Hu;Ji Gao;Jianwei Lin;Huafeng Chen
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2019年第2期
- body scanning;
- 3D object modelling;
- depth camera;
- Kinect;
- cost function;
69.Three-dimensional image reconstruction method for human maxillofacial defect images based on block sample feature matching

机译：基于块样本特征匹配的人颌面缺陷图像的三维图像重建方法
- 作者：Zhaofeng Li;Ling-ling Cui
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2019年第3期
- human maxillofacial defect;
- three-dimensional reconstruction;
- corner detection;
- image;
70.Finite element analysis of the vertical roller mill based on ANSYS Workbench

机译：基于ANSYS Workbench的垂直滚筒磨机的有限元分析
- 作者：Weihua Wei;Hongwei Zhu;Yuantong Li;Peng Jin
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2019年第3期
- vertical roller mill;
- lower rocker arm;
- column;
- static analysis;
- ANSYS Workbench;
- modal analysis;
71.The safety research of road alignment based on virtual simulation technology

机译：基于虚拟仿真技术的道路对齐安全研究
- 作者：Chang Lv;Dengfeng Shi;Shangbing Gao;Shuo Liu
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第4期
- traffic safety;
- geometric design;
- vehicle dynamics;
- virtual simulation;
72.Model test study on seismic performance of new type column-plate hollow high pier

机译：新型列板空心高码头抗震性能模型试验研究
- 作者：Li Ziqi;Yu Lusong;Fan Yanyan
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第4期
- high pier;
- high intensity zones;
- seismic performance;
- column plate pier;
- destructive mode;
- hysteresis characteristics;
73.Numerical analysis of MHD natural convection in a partially open cavity with internal energy source

机译：内部能源部分开腔中MHD自然对流的数值分析
- 作者：N. Nithyadevi;M. Rajarathinam
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第4期
- internal heat source;
- natural convection;
- open cavity;
- magnetohydrodynamics;
- MHDs;
74.Networked multi pipeline pressure synchronous coordinated predictive control based on the model free adaptive method

机译：基于模型自适应方法的网络多管线压力同步协调预测控制
- 作者：You Wu;Guo-Ping Liu
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2019年第2期
- networked control system;
- NCS;
- pressure control;
- model free adaptive control;
- MFAC;
- synchronous coordination;
- data-based predictive control;
75.Computational study on the effect of orifice-edge-chamfered angle on the synthetic jet characteristics

机译：孔口边缘倒角角度对合成射流特性影响的计算研究
- 作者：Hong Mun Hoh;Cheng See Yuan;Teo Yong Soon;Lim Kim Chuan
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2019年第3期
- computational study;
- orifice edges;
- synthetic jet characteristics;
76.Stress and deformation analysis of a reinforced continuous girder bridge

机译：增强连续梁桥的应力与变形分析
- 作者：Dong-Yu Ji;Xiao-Fen Li
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2019年第3期
- box girder;
- continuous girder bridge;
- numerical simulation;
- calculation model;
- stress distribution;
77.Study on nonlinear friction compensation control in the electro-hydraulic servo loading system of triaxial apparatus

机译：三轴仪器电液伺服液加载系统中非线性摩擦补偿控制研究
- 作者：Yong Sang;Weiqi Sun;Xudong Wang
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第3期
- nonlinear friction;
- triaxial apparatus;
- uncertain disturbance;
- ILC;
- iterative learning control;
- SMC;
- sliding mode control;
78.Enhanced monitoring of batch process using just-in-time learning-based kernel independent component analysis

机译：使用即时学习的内核独立分量分析增强了对批处理过程的监控
- 作者：Li Wang
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第3期
79.Identification of nonlinear dynamic systems described by Hammerstein state-space models with discontinuous nonlinearities

机译：具有不连续非线性的Hammersein状态空间模型描述的非线性动力系统的识别
- 作者：Houda Salhi;Samira Kamoun
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第3期
80.Multi-band circular polariser based on periodic metallic strip array

机译：基于周期金属条阵列的多带圆极化器
- 作者：Farman Ali Mangi;Shaoqiu Xiao;Ghulam Ali Mallah;Deedar Ali Jamro;Imran Memon;Ghulam Fatima Kakepoto
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第3期
- Dual-layer polariser;
- Circular polarisation;
- Fission transmission;
- Quarter wave plate;
- Metamaterial;
81.Main steam temperature control based on GA-BP optimised fuzzy neural network

机译：基于GA-BP优化模糊神经网络的主蒸汽温度控制
- 作者：Zhongda Tian
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第3期
- Main steam temperature;
- Genetic algorithm;
- BP algorithm;
- Fuzzy control;
- Fuzzy neural network;
82.A numerical study of a greenhouse CFD simulation including radiation heat transfer and transpiration

机译：温室CFD仿真的数值研究，包括辐射热传递和蒸腾
- 作者：Karin Farber;Peter Farber;Jens Grabel;Sebastian Krick;Peer Ueberholz
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第3期
- Computational fluid dynamics;
- CFD;
- Radiation heat transfer;
- Transpiration;
- Greenhouse;
- Tomato crop;
83.Shape optimisation of two-dimensional structures using isogeometric analysis

机译：使用异构测定分析形状优化二维结构
- 作者：Vinay K. Ummidivarapu;Hari K. Voruganti
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第3期
- Isogeometric analysis;
- IGA;
- Shape optimisation;
- Structural analysis;
- Non-uniform rational B-splines;
- NURBS;
- Finite elements;
- Meshless method;
- Genetic algorithm;
84.Modelling and simulation of an industrial flow between two moving permeable surfaces

机译：两个移动可渗透表面之间工业流动的建模与仿真
- 作者：Jacques Hona;Médard Marcus Nganbe II
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第4期
85.A network traffic prediction method based on IFS algorithm optimised LSSVM

机译：一种基于IFS算法优化LSSVM的网络流量预测方法
- 作者：Zhongda Tian;Shujiang Li
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第4期
- network traffic;
- prediction;
- least squares support vector machines;
- LSSVM;
- improved free search;
- IFS;
- optimisation;
86.Numerical simulation of heat and fluid flow through silicon-based microchannel with different surface roughness elements

机译：用不同表面粗糙度元素的硅基微通道热流体流动的数值模拟
- 作者：Sasmita Bal;Purna Chandra Mishra;Ashok Kumar Satapathy
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第4期
- laminar flow;
- computational fluid dynamics;
- CFD;
- microchannel;
- surface roughness;
- heat transfer;
87.Implementation of 4D/BIM in the Iraqi construction industry

机译：伊拉克建筑业实施4D / BIM
- 作者：Hussein Mahmood Hamada;Ahmad Tarmizi Haron;Zahrizan Zakaria Zahrizan;Ali M. Humada
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第4期
- building information modelling;
- BIM;
- 4D/BIM;
- Al-Najaf Hospital project;
- Naviswork and Syncro;
- Iraq construction industry;
88.A numerical study on aerodynamic wake flow control over airfoils by micro jet actuators

机译：微射流致动器对翼型喷气机的空气动力学唤醒流量控制的数值研究
- 作者：L. Prawin;J. Bruce Ralphin Rose
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2017年第4期
- MJ actuator;
- wake flow;
- moving wall boundary condition;
- transient flow analysis;
- ANSYS;
89.Simulation study on speed control of permanent magnet direct-driven system for mining scraper conveyor

机译：用于采矿刮刀输送机永磁直接驱动系统速度控制的仿真研究
- 作者：En Lu;Wei Li;Xuefeng Yang;Shaoyi Xu
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第1期
- permanent magnet synchronous motor;
- PMSM;
- scraper conveyor;
- electromechanical coupling;
- sliding mode control;
- load characteristic;
90.Modelling and validation of a novel continuously variable transmission system using slider crank mechanism

机译：用滑块曲柄机构建模与验证一种新型连续可变传动系统
- 作者：Muhammad Luqman Hakim Abd Rahman;Khisbullah Hudha;Zulkiffli Abd Kadir;Noor Hafizah Amer;Vimal Rau Aparow
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第1期
- model validation;
- continuously variable transmission;
- CVT;
- slider crank mechanism;
- Lagrange formulation;
91.Mathematical modelling of morphological transition and spot segregation in continuously-cast high carbon steel billets

机译：连续铸造高碳钢坯料形态转型与点偏析的数学建模
- 作者：Suryanaman Chaube
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第1期
- continuous casting;
- columnar-to-equiaxed;
- billet;
- high carbon;
- morphology;
- spot segregation;
92.Modelling, simulations and operational performance of a stand-alone hybrid wind/PV energy system supplying induction motor for pumping applications

机译：独立式混合式风电/光伏能源系统供应泵浦应用的建模，仿真和操作性能
- 作者：Mohammed I. Abuashour;Mohammad S. Widyan;Thaer O. Sweidan;Mohammed A. Momani
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第1期
- self-excited induction generator;
- SEIG;
- hybrid wind/PV system;
- induction motor;
- dynamical analysis;
93.Sliding mode control for a wind turbine in finite frequency

机译：有限频率下风力涡轮机的滑模控制
- 作者：Youssef Berrada;Ismail Boumhidi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第1期
- finite frequency;
- sliding mode control;
- reaching law;
- wind turbine;
- systems modelling;
94.State-dependent Riccati equation sliding mode observer for mathematical dynamic model of chronic myelogenous leukaemia

机译：慢性髓性白血病数学动态模型的状态依赖性Riccati方程滑动模式观察
- 作者：Amin Sharafian;Zeinab Ebrahimi Fard
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第2期
- CML;
- chronic myelogenous leukaemia;
- SDRE;
- state-dependent Riccati equation;
- sliding mode observer;
- optimal observer;
95.Study on model of greenhouse gas N₂O emission flux of rice field in cold region in growing season in water-saving irrigation mode

机译：节水灌溉模式中生长季节稻田温室气体N <亚> 2 2 O发射通量的研究
- 作者：Yu Lihong;Wang Mengxue
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第2期
- rice production in cold region;
- irrigation mode;
- N2O;
- model;
96.Mathematical modelling and simulation for biogas production from organic waste

机译：有机废弃物生产沼气的数学建模与仿真
- 作者：Liliana Delgadillo-Mirquez;Mauricio Hernández-Sarabia;Maximiliano Machado-Higuera
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第2期
97.A mathematical model for scheduling of production process and allocation of an automatic guided vehicle in a flexible manufacturing system

机译：一种柔性制造系统中生产过程和自动引导车辆分配的数学模型
- 作者：Mohammad Mehdi Tavakoli;Hasan Haleh;Mohsen Mohammadi
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第2期
- flexible manufacturing system;
- AGV;
- automatic guided vehicle;
- mathematical modelling;
- scheduling;
98.CFD modelling of air temperature distribution inside tunnel greenhouse in semi-arid region

机译：半干旱地区隧道温室内空气温度分布的差价合约造型
- 作者：Dhahri Maher;Ameur Sami;Aouinet Hana
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第2期
- greenhouse tunnel;
- natural ventilation;
- CFD;
- computational fluid dynamics;
- climate heterogeneity;
99.Research on energy consumption system of iron and steel enterprises with bottleneck

机译：瓶颈钢铁企业能耗系统研究
- 作者：Chen Demin;Lu Biao;Chen Guang
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第2期
- the IIDM e-p model;
- PCA;
- partial correlation analysis;
- MLR modelling;
- bottleneck location;
100.Numerical analysis of non-isothermal walls driven-gas flow

机译：非等温壁驱动气流的数值分析
- 作者：Mohamed Hssikou;Jamal Baliti;Mohammed Alaoui
- 期刊名称：《International Journal of Engineering Systems Modelling and Simulation》 | 2018年第2期
- R13;
- DSMC;
- direct simulation Monte Carlo;
- thermal creep;
- microcavity;
- rarefied gas flow;
- NSF;
- Navier-Stokes and Fourier;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号