...
首页> 外文期刊>Physiological measurement >Endotracheal tube resistance and inertance in a model of mechanical ventilation of newborns and small infants - The impact of ventilator settings on tracheal pressure swings
【24h】

Endotracheal tube resistance and inertance in a model of mechanical ventilation of newborns and small infants - The impact of ventilator settings on tracheal pressure swings

机译:新生儿和婴儿机械通气模型中的气管内插管阻力和惯性-呼吸机设置对气管压力波动的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Resistive properties of endotracheal tubes (ETTs) are particularly relevant in newborns and small infants who are generally ventilated through ETTs with a small inner diameter. The ventilation rate is also high and the inspiratory time (ti) is short. These conditions effectuate high airway flows with excessive flow acceleration, so airway resistance and inertance play an important role. We carried out a model study to investigate the impact of varying ETT size, lung compliance and ventilator settings, such as peak inspiratory pressure (PIP), positive end expiratory pressure (PEEP) and inspiratory time (ti) on the pressure-flow characteristics with respect to the resistive and inertive properties of the ETT. Pressure at the Y piece was compared to direct measurement of intratracheal pressure (P_(trach)) at the tip of the ETT, and pressure drop (ΔP_(ETT)) was calculated. Applying published tube coefficients (Rohrer's constants and inertance), P_(trach) was calculated from ventilator readings and compared to measured Ptrach using the root-mean-square error. The most relevant for ΔP_(ETT) was the ETT size, followed by (in descending order) PIP, compliance, ti and PEEP, with gas flow velocity being the principle in common for all these parameters. Depending on the ventilator settings ΔP_(ETT) exceeded 8 mbar in the smallest 2.0 mm ETT. Consideration of inertance as an additional effect in this setting yielded a better agreement of calculated versus measured P_(trach) than Rohrer's constants alone. We speculate that exact tracheal pressure tracings calculated from ventilator readings by applying Rohrer's equation and the inertance determination to small size ETTs would be helpful. As an integral part of ventilator software this would (1) allow an estimate of work of breathing and implementation of an automatic tube compensation, and (2) be important for gentle ventilation in respiratory care, especially of small infants, since it enables the physician to estimate consequences of altered ventilator settings at the tracheal level.
机译:气管内插管(ETTs)的电阻特性在通常通过内径小的ETT进行通气的新生儿和婴儿中尤为重要。通气率也高,吸气时间(ti)短。这些情况会导致过高的气流加速产生高气道流量,因此气道阻力和惯性起着重要作用。我们进行了模型研究,以研究各种ETT大小,肺顺应性和呼吸机设置(例如,峰值吸气压力(PIP),呼气末正压(PEEP)和吸气时间(ti))对压力流量特性的影响。关于ETT的电阻和惯性特性。比较Y片上的压力与直接测量ETT尖端的气管内压力(P_(trach)),并计算压降(ΔP_(ETT))。应用已发布的试管系数(Rohrer常数和惯性),从呼吸机读数计算出P_(trach),并使用均方根误差与测得的Ptrach进行比较。与ΔP_(ETT)最相关的是ETT尺寸,其次是PIP,顺应性,ti和PEEP(按降序排列),所有这些参数的共同原理是气体流速。在最小的2.0毫米ETT中,取决于呼吸机设置,ΔP_(ETT)超过8 mbar。在这种情况下,将惯性视为额外的影响比单独使用Rohrer常数可以更好地计算和测量P_(trach)。我们推测,通过应用Rohrer方程从呼吸机读数计算出的精确气管压力描记和对小尺寸ETT的惯性确定将很有帮助。作为呼吸机软件的组成部分,这将(1)允许估计呼吸工作量并实现自动管补偿,并且(2)对于呼吸护理(尤其是婴儿)中的温和通风非常重要,因为它可以使医生估计气管水平呼吸机设置改变的后果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号