首页> 外文期刊>Mechatronics: The Science of Intelligent Machines >Synchronization controller for a 3-R planar parallel pneumatic artificial muscle (PAM) robot using modified ANFIS algorithm
【24h】

Synchronization controller for a 3-R planar parallel pneumatic artificial muscle (PAM) robot using modified ANFIS algorithm

机译:使用改进的ANFIS算法的3-R平面并联气动人工肌肉(PAM)机器人的同步控制器

获取原文
获取原文并翻译 | 示例
       

摘要

Parallel manipulator is a closed-kinematic chain mechanism in which performance of its end effector - moving platform is contributed by its independent actuators. In traditional designs, each elemental actuator has its own controller as well as reference input, and it works independently without gathering information from its neighbors. Consequently, as one of the actuators cannot keep up with the others, the platform performance is easily deteriorated due to the lack of coherence between these actuators. Therefore, the aim of this paper is to design a 3-R planar parallel robot and develop a proper synchronization controller for its tracking control task. Adaptive Network Based Fuzzy Inference System (ANFIS) algorithm was modified and applied as the main strategy of this synchronization controller. The controller is then able to compensate errors between the actuators and enforce them to cooperate harmonically with each other regardless external disturbances caused by the outside environment or geometrical constraints of the closed-loop structure. Simulations and practical experiments on a scaled parallel robot were carried out to evaluate the designed controller. The results showed that by applying the proposed control technique, the working errors of the component actuators converged quickly to zero almost at the same time. As a result, the tracking performance of the common platform was significantly improved in comparison with the performance when applying a non-synchronization controller. The proposed method is effective in controlling systems which require collaborations between the sub-agents.
机译:并联机械手是一种闭合运动链机构,其末端执行器-移动平台的性能由其独立的执行器提供。在传统设计中,每个基本执行器都有其自己的控制器以及参考输入,并且独立工作而不需要从其邻居那里收集信息。因此,由于其中一个致动器不能跟上其他致动器,因此由于这些致动器之间缺乏连贯性,平台性能容易劣化。因此,本文的目的是设计一个3-R平面并联机器人,并为其跟踪控制任务开发合适的同步控制器。改进了基于自适应网络的模糊推理系统(ANFIS)算法,并将其作为该同步控制器的主要策略。控制器然后能够补偿致动器之间的误差,并使它们相互协调协调,而不受外部环境或闭环结构的几何约束引起的外部干扰。在比例并行机器人上进行了仿真和实际实验,以评估设计的控制器。结果表明,通过应用所提出的控制技术,组件执行器的工作误差几乎同时收敛到零。结果,与应用非同步控制器时的性能相比,通用平台的跟踪性能得到了显着改善。所提出的方法在控制需要子代理之间协作的系统中是有效的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号