...
首页> 外文期刊>Medical Physics >A comparison of reconstruction algorithms for C-arm mammography tomosynthesis.
【24h】

A comparison of reconstruction algorithms for C-arm mammography tomosynthesis.

机译:C臂X线断层扫描断层合成重建算法的比较。

获取原文
获取原文并翻译 | 示例
           

摘要

Digital tomosynthesis is an imaging technique to produce a tomographic image from a series of angular digital images in a manner similar to conventional focal plane tomography. Unlike film focal plane tomography, the acquisition of the data in a C-arm geometry causes the image receptor to be positioned at various angles to the reconstruction tomogram. The digital nature of the data allows for input images to be combined into the desired plane with the flexibility of generating tomograms of many separate planes from a single set of input data. Angular datasets were obtained of a low contrast detectability (LCD) phantom and cadaver breast utilizing a Lorad stereotactic biopsy unit with a coupled source and digital detector in a C-arm configuration. Datasets of 9 and 41 low-dose projections were collected over a 30 degrees angular range. Tomographic images were reconstructed using a Backprojection (BP) algorithm, an Iterative Subtraction (IS) algorithm that allows the partial subtraction of out-of-focus planes, and an Algebraic Reconstruction (AR) algorithm. These were compared with single view digital radiographs. The methods' effectiveness at enhancing visibility of an obscured LCD phantom was quantified in terms of the Signal to Noise Ratio (SNR), and Signal to Background Ratio (SBR), all normalized to the metric value for the single projection image. The methods' effectiveness at removing ghosting artifacts in a cadaver breast was quantified in terms of the Artifact Spread Function (ASF). The technology proved effective at partially removing out of focus structures and enhancing SNR and SBR. The normalized SNR was highest at 4.85 for the obscured LCD phantom, using nine projections and IS algorithm. The normalized SBR was highest at 23.2 for the obscured LCD phantom, using 41 projections and an AR algorithm. The highest normalized metric values occurred with the obscured phantom. This supports the assertion that the greatest value of tomosynthesis is in imaging fibroglandular breasts. The ASF performancewas best with the AR technique and nine projections.
机译:数字断层合成是一种成像技术,以类似于常规焦平面层析成像的方式从一系列角度数字图像生成层析图像。与胶片焦平面断层扫描不同,C臂几何形状的数据采集导致图像接收器相对于重建断层扫描图以各种角度定位。数据的数字性质允许将输入图像组合到所需平面中,并且可以灵活地从一组输入数据中生成许多单独平面的断层图。利用Lorad立体定位活检单元以及C臂配置的耦合源和数字检测器,获得了低对比度可检测性(LCD)体模和尸体乳房的角度数据集。在30度角范围内收集了9个和41个低剂量投影的数据集。使用Backprojection(BP)算法,允许部分减去焦平面的迭代减法(IS)算法和代数重建(AR)算法重建断层图像。将这些与单视图数字X射线照片进行了比较。根据信噪比(SNR)和信噪比(SBR)量化了这些方法增强被遮盖的LCD幻像的可见性的有效性,所有这些都标准化为单个投影图像的度量值。通过伪影扩散功能(ASF)量化了该方法在去除尸体乳房中重影伪影的有效性。事实证明,该技术可有效地部分消除聚焦结构并增强SNR和SBR。使用九个投影和IS算法,对于模糊的LCD幻像,归一化SNR最高为4.85。使用41个投影和AR算法,模糊的LCD体模的归一化SBR最高为23.2。最高的标准化度量值出现在模糊的幻像上。这支持断层合成的最大价值在于对纤维腺乳腺成像的主张。使用AR技术和9个预测,ASF性能最佳。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号