Investigation into the Effect of Voltage Excitation of Pre-Ignition Spark Pulse on the Electro-Discharge Machining (EDM) Process

摘要

Studying the variation of the electro-discharge machining (EDM) process outputs due to the change in shape of the generated pulse is one research aspect in the EDM process. In this study, the effects of voltage excitation of the pre-ignition spark pulse on the process outputs material removal rate (MRR), electrode wear ratio (EWR), and surface roughness (Ra) have been investigated. Experiments were designed using design of experiments (DOE), and the results were analyzed using analysis of variance (ANOVA). Based on the results, it has become clear that applying voltage excitation of the pulse produces effective pulses, which in turn lessens EWR, increases MRR, and improves surface quality. Hence, the suitability of this method has been verified for EDM.