首页>外文期刊>Materials and Manufacturing Processes

Materials and Manufacturing Processes

Materials and Manufacturing Processes

中文名称：材料和制造过程

ISSN：1042-6914
出版周期：-

发文量：2566

期刊论文

年度选择

2021
- 第4期
2020
- 第4期
- 第8期
- 第12期
- 第16期
2019
- 第4期
- 第8期
- 第12期
- 第16期
2018
- 第4期
- 第8期
- 第12期
- 第16期
2017
- 第4期
- 第8期
- 第12期
- 第16期
2016
- 第4期
- 第8期
- 第12期
- 第16期
2015
- 第3期
- 第6期
- 第9期
- 第12期
2014
- 第3期
- 第6期
- 第9期
- 第12期
2013
- 第3期
- 第6期
- 第9期
- 第12期
2012
- 第1期
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2011
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2010
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2009
- 第3期
- 第6期
- 第9期
- 第12期
2008
- 第2期
- 第4期
- 第6期
- 第8期
2007
- 第2期
- 第4期
- 第6期
- 第8期
2006
- 第2期
- 第4期
- 第6期
- 第8期
2005
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2004
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2003
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2002
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2001
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2000
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
1999
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第5期
- 第6期
1998
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期

更多>>

全选（0）

1.A Three-Dimensional Strain Gradient Plasticity Analysis of Particle Size Effect in Composite Materials

机译：复合材料中颗粒尺寸效应的三维应变梯度可塑性分析
- 作者：F. ZHANG;Y. HUANG;K.C. HWANG
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
- Composite material;
- FEM;
- Strain gradient;
- Three-dimension;
2.Constitutive Equation Based on Phase Transformations for Shape-Memory Actuators of Reconfigurable Systems

机译：基于相位变换的可重构系统形状记忆执行器本构方程
- 作者：JORGE A. CORTES;ROGELIO DE LA GARZA;SERGIO GALLEGOS
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第4期
3.Effect of Cold Work on Tensile Properties During Annealing Process for Pure Commercial Aluminum (AA 1070 Alloy)

机译：商用纯铝（AA 1070合金）退火过程中冷加工对拉伸性能的影响
- 作者：RAED M. AL QASSAB
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第8期
- Aluminium alloys;
- Annealing process;
- Cold work;
- Tensile properties;
4.Effect of pH on the Crystallization of Homogeneously Precipitated Nanosized PZT Powder

机译：pH值对均相沉淀纳米PZT粉末结晶的影响
- 作者：S. ROY;S. BYSAKH;J. SUBRAHMANYAM
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第4期
5.Evolving Nonlinear Time-Series Models of the Hot Metal Silicon Content in the Blast Furnace

机译：高炉中铁水硅含量的非线性时间序列模型
- 作者：HENRIK SAXEN;FRANK PETTERSSON;KIRAN GUNTURU
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第6期
- Genetic algorithm;
- Ironmaking;
- Multiobjective;
- Neural networks;
- Optimization;
- Pareto front;
- Time-series models;
6.Genetic Algorithms Applied to Li~+ Ions Contained in Carbon Nanotubes: An Investigation Using Particle Swarm Optimization and Differential Evolution Along with Molecular Dynamics

机译：遗传算法应用于碳纳米管中所含的Li〜+离子：使用粒子群算法和差分演化以及分子动力学的研究
- 作者：N. CHAKRABORTI;S. DAS;R. JAYAKANTH
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第6期
7.Investigation into the Effect of Voltage Excitation of Pre-Ignition Spark Pulse on the Electro-Discharge Machining (EDM) Process

机译：研究点火前火花脉冲的电压激励对电火花加工（EDM）过程的影响
- 作者：M. GHOREISHI;C. TABARI
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第8期
8.Effect of Thermal Processing on Microstructure and Shape-Memory Characteristics of a Copper-Zinc-Aluminum Shape-Memory Alloy

机译：热处理对铜锌铝形状记忆合金组织和形状记忆特性的影响
- 作者：V. SAMPATH
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
- Aging;
- Martensite;
- Quenchants;
- Quenching;
- Shape-memory alloys;
- Shape-memory effect;
- Stabilization;
- Thermal treatment;
- Transformations;
- Transformation temperatures;
9.Investigation of Processing Conditions of Melded Parts to Determine Process Boundaries

机译：研究熔化零件的加工条件以确定加工边界
- 作者：TIM CORBETT;MARK FORREST;BRONWYN L. FOX
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第6期
- DCB;
- Degree of cure;
- ENF;
- Hexply 914;
- Joining;
- Melding;
- Short beam shear;
- Thermosetting composites;
- Transition zone;
10.Spectroscopic Study of Autocombustion Process in the Synthesis of Nano Particles of Ni-Cu Ferrite

机译：镍铜铁氧体纳米粒子合成中自燃过程的光谱研究
- 作者：G. CHANDRASEKARAN
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第4期
- Autocombustion;
- Cu-Ni ferrite;
- Curie transition;
- DSC;
- FTIR;
- Jahn Teller;
- Sol-gel nano-particles of ferrite;
- Stages of route of synthesis;
- TGA;
- XRD;
11.Hybrid Approach to Optimal Packing Using Genetic Algorithm and Coulomb Potential Algorithm

机译：遗传算法和库仑势算法的混合优化装箱方法
- 作者：BISWAJIT MAHANTY;RAJNEESH KUMAR AGRAWAL;SHRIKRISHNA SHRIN
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第6期
- Blank packing;
- Coulomb potential algorithm;
- Real-encoded genetic algorithm;
12.Direct Writing of Spot and Line Bonds for Microsystem Packaging Using Transmission Laser Bonding Technique

机译：使用传输激光键合技术直接写入用于系统封装的点焊和线焊
- 作者：JONG-SEUNG PARK;HAN ZHU;ZHILONG ZHAO
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
- Bonding;
- Contact pressure;
- Direct writing;
- Laser;
- Line bond;
- MEMS;
- Microsystem;
- Packaging;
- Pyrex glass;
- Reliability;
- Silicon;
- Spot bond;
- Strength;
- Surface roughness;
- Transmission laser bonding;
13.Influence of a Retaining Ring on Strain and Stress in the Chemical Mechanical Polishing Process

机译：固定环对化学机械抛光过程中的应变和应力的影响
- 作者：YEOU-YIH LIN
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第8期
- Carrier;
- CMP;
- Film;
- Finite element;
- Nonuniformity;
- Pad;
- Quasi-static model;
- Retaining ring;
- Strain component;
- Stress component;
- Von Mises stress;
- Wafer;
14.Densification and Grain-Growth Behavior of Various Amounts of SiO_2 Doped 8YSCZ/SiO_2 Composites

机译：SiO_2掺杂8YSCZ / SiO_2复合材料的致密化和晶粒长大行为
- 作者：S. TEKELI;M. GURU;O. E. SAGLAM
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第6期
- Activation energy;
- Annealing;
- Colloidal processing;
- Cubic zirconia;
- Densification;
- Diffusion;
- Grain growth;
- Grain boundary energy;
- Grain boundary mobility;
- Liquid phase sintering;
- Microstructure;
- Segregation;
- Silica;
- Sintering;
- Solubility;
- SEM;
- XRD;
15.Creep Behavior of As-Cast Ti-48Al-2Cr Intermetallic Alloy for Aerospace and Automotive Applications

机译：As-Cast Ti-48Al-2Cr金属间合金在航空航天和汽车应用中的蠕变行为
- 作者：E. HAMZAH;M. KANNIAH;M. HARUN
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第8期
- Activation energy;
- Alloy;
- As-cast;
- Chromium;
- Creep;
- Initial stress;
- Instantaneous creep strain;
- Microstructure;
- Minimum creep behavior;
- Steady state creep behavior;
- Stress exponent;
- Temperature;
- Ti-48Al;
- Ti-48Al-2Cr;
- TiAl;
16.Computer Model of Recrystallization Texture in Aluminum Alloys

机译：铝合金再结晶织构的计算机模型
- 作者：J. A. SZPUNAR;R. NARAYANAN;H. LI
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第8期
- Al;
- Computer modeling;
- Recrystallization;
- Texture;
17.Genetic-Algorithm-Based Optimization of an Industrial Age-Hardening Operation for Packed Bundles of Aluminum Rods

机译：基于遗传算法的铝棒包装捆束工业年龄强化操作的优化
- 作者：SATYAM S. SAHAY;RAJESH MEHTA;KARTHIK KRISHNAN
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第6期
18.Creep of Al Underlayer Determined by Channel Cracking of Topical Si_3N_4 Film

机译：由局部Si_3N_4薄膜的沟道开裂确定的Al底层蠕变
- 作者：SEYED M. ALLAMEH;ZHIGANG SUO;WOLE SOBOYEJO
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
- Channel cracking;
- Crack growth;
- Creep;
- Multilayer structure;
- SiN;
- Thin films;
19.Understanding Grain Growth Behavior in a Superplastic Nickel-Based Nanocomposite: Influence of Mechanical Deformation and Heat Treatment

机译：了解超塑性镍基纳米复合材料的晶粒长大行为：机械变形和热处理的影响。
- 作者：K.C. CHAN;C.L. WANG;L. LIU
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
- Deformation mechanism;
- Electrodeposition;
- Grain growth;
- Nanocomposite;
- Superlasticity;
20.Structural and Mechanical Characterization of As-Cast Al-Li-Hf Alloy

机译：铸态Al-Li-Hf合金的结构和力学性能
- 作者：TOMAS RANGEL-ORTIZ;FEDERICO CHAVEZ-ALCALA;E. CURIEL-REYNA
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
- As-cast alloys;
- Al-Li-Hf alloy;
- Al structure;
- Cooling rate;
- Dendrites;
- Grain boundary;
- Heat treatment;
- High wave medium;
- Ingot;
- Intermetallic;
- Mechanical properties;
- Metallic materials;
- Microhardness;
- Precipitates;
- Wedged chapped mold;
21.Influence of the Preheat Treatment on the Microstructure and Properties of X37CrMoV5-l Steel

机译：预热处理对X37CrMoV5-1钢的组织和性能的影响
- 作者：JOZEF JASINSKI;ROMAN TORBUS;EWA KASPRZYCKA
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
- Bainite;
- Carbides;
- Carbonitriding;
- Diffusion;
- Diffusional zone;
- Fluidized bed;
- Hot-work tool steel;
- Martensite;
- Microhardness;
- Microstructure;
- Preheat treatment;
- Residual austenite;
- Surface layer;
- Surface treatment;
- X-ray diffraction;
22.Kinetic Aspects of the Nanocrystallization and Evolution of Microhardness in Al_(92-x)Ni_8La_x Amorphous Alloys

机译：Al_（92-x）Ni_8La_x非晶态合金纳米晶化和微观硬度演变的动力学方面
- 作者：K. L. SAHOO;RINA SAHU;AMITAVA MITRA
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第4期
- Activation energy;
- Al-based amorphous alloy;
- Crystallization;
- Differential scanning calorimetry;
- Microhardness;
23.Effects of Lubricant Condition and Tool Wear in Hard Turning of Novel-Abrasion-Resistance (N-AR) Cast Iron

机译：润滑条件和工具磨损对新型耐磨铸铁硬车削的影响
- 作者：J. ZHOU;M. ANDERSSON
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第8期
- Abrasion;
- CBN;
- Cutting;
- Lubricant;
- Wear;
24.Tungsten Fibre Reinforced Zr-Based Bulk Metallic Glass Composites

机译：钨纤维增强锆基块状金属玻璃复合材料
- 作者：H. WANG;H. F. ZHANG;Z. Q. HU
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第6期
- Amorphous metals;
- Bulk metallic glass composites;
- Bulk metallic glasses;
- Ductility;
- Shear band;
- Tungsten fibre reinforced BMG;
- Zr-based BMG;
25.Numerical Simulation of Hydroforming Process Involving a Tubular Blank with Dissimilar Thickness

机译：厚度不同的管状毛坯液压成形过程的数值模拟
- 作者：R.M. NATAL JORGE;R.A.F. VALENTE;A.P. ROQUE
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
26.Processing of In Situ Aluminium Matrix Composites by Micropyretic Reactive Sintering

机译：微热解反应烧结原位铝基复合材料的制备
- 作者：A. BASUMALLICK;S. GHOSH
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第6期
- Alumina;
- DSC;
- EDS;
- Fretting;
- Hardness;
- In situ;
- Iron-aluminide;
- Mechanical-milling;
- Metal matrix composite;
- Micropyretic;
- Nanosize;
- Reactive-sintering;
- SEM;
- Wear;
- XRD;
27.Acoustic Emission (AE) Monitoring of Open Die and Closed Die Forging Processes of Al Alloy

机译：铝合金开模和闭模锻造过程的声发射（AE）监控
- 作者：C. K. MUKHOPADHYAY;S. VENUGOPAL;T. JAYAKUMAR
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第8期
- Acoustic emission (AE);
- Al Alloy;
- Closed die forging;
- Die filling;
- Dislocation avalanche;
- Forming;
- Friction;
- Lubrication;
- Monitoring;
- Nondestructive technique;
- Open die forging;
- Peak amplitude distribution;
- Piezoelectric;
- Sliding;
- Yielding;
28.Influence of Die Angle on Containerless Extrusion of Commercially Pure Titanium Tubes

机译：模具角对市售纯钛管无容器挤压的影响
- 作者：K. SRINIVASAN;P. VENUGOPAL
- 期刊名称：《Materials and Manufacturing Processes》 | 2007年第2期
- Angle;
- Container;
- Die;
- Experimental;
- Extrusion;
- Force;
- Friction;
- Lubricant;
- Pressure;
- Stress;
- Temperature;
- Theoretical;
- Titanium;
- Tubes;
29.Effect of Surface Modifications on the Bonding Strength of Titanium—Porcelain

机译：表面改性对钛瓷结合强度的影响
- 作者：LITONG GUO;XIAOCHEN DU;JIQIANG GAO;JIANFENG YANG;TIANWEN GUO;YABO ZHU
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Adhesion;
- Dental material;
- Interfaces;
- Porcelain fused to metal;
- Sol-gel;
- Surface modifications;
- Tin oxide film;
- Titanium–porcelain bonding;
30.Plasma Keyhole Welding of UNS 532760 Super Duplex Stainless Steel:Microstructure and Mechanical Properties

机译：UNS 532760超级双相不锈钢的等离子小孔焊接：组织和力学性能
- 作者：K. MIGIAKIS;N. DANIOLOS;G. D. PAPADIMITRIOU
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Fracture;
- Impact toughness;
- Mechanical properties;
- Microstructure;
- Nitrogen addition;
- Plasma keyhole;
- Super duplex stainless steel;
- Tensile strength;
- Welding;
- Zeron 100;
31.Microstructure and Properties of Active Screen Plasma Nitrided Duplex Stainless Steel

机译：活性屏等离子渗氮双相不锈钢的组织和性能
- 作者：L. H. CHIU;Y. Y. Su;F. S. CHEN;H. CHANG
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- Active screen plasma nitriding;
- Corrosion;
- Duplex stainless steel;
- Wear;
32.Microscopical Observation of the Marine Bacterium Vibrio Natriegeus Growth on Metallic Corrosion

机译：海洋细菌弧菌生长对金属腐蚀的显微观察
- 作者：SHA CHENG;KIN-TAK LAU;SHOUGANG CHEN;XUETING CHANG;TAO LIU;YANSHENG YIN
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- AFM;
- Biofilm;
- Microbially influenced corrosion (MIC);
- Microscope technologies;
- SEM;
- Vibrio natriegens;
33.Effect of Ferrite Grain Size on Cyclic Ratcheting Behavior of a Low-Carbon Niobium Bearing Microalloyed Steel

机译：铁素体晶粒尺寸对低碳含铌微合金钢循环棘轮行为的影响
- 作者：P. P. SARKAR;P. C. CHAKRABORTI;S. K. SEN
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第3期
- Cyclic ratcheting;
- Ferrite grain size;
- Low cycle fatigue;
- Microalloyed steel;
34.Experimental Study on the Influence of Tool Electrode Tip Shape on Electrochemical Micromachining of 304 Stainless Steel

机译：工具电极头形状对304不锈钢电化学微加工影响的实验研究
- 作者：R. Thanigaivelan;RM. Arunachalam
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Electrode;
- Electrolyte;
- Machining rate;
- Micromachining;
- Overcut;
35.Evaluation of Machining Parameters of Hot Turning of Stainless Steel (Type 316) by Applying ANN and RSM

机译：应用ANN和RSM评估不锈钢（316型）热车削的加工参数
- 作者：S. Ranganathan;T. Senthilvelan;G. Sriram
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Artificial neural network (ANN);
- Hot turning;
- Response Surface Methodology (RSM);
- Surface roughness;
- 316 stainless steel;
36.Innovative Approaches in Physical Simulation and Modeling for Optimal Design and Processing of Advanced High Strength Steels

机译：物理模拟和建模的创新方法，用于高级高强度钢的最佳设计和加工
- 作者：M. C. SOMANI;L. P. KARJALAINEN
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第3期
37.Low-Power Laser/TIG Hybrid Welding Process of Magnesium Alloy with Filler Wire

机译：填充丝镁合金的低功率激光/ TIG混合焊接工艺
- 作者：Liming Liu;Xinfeng Hao
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Filler wire;
- Low-power laser/arc hybrid welding;
- Magnesium alloy;
- Plasma spectra;
38.Prediction of Strain Gradient Hardening During Microextrusion

机译：微挤压过程中应变梯度硬化的预测
- 作者：SUNAL AHMET PARASIZ;BRAD L. KINSEY
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Analytical model;
- Extrusion;
- Microforming;
- Strain gradient hardening;
39.Optimization of the GTA Welding Process Using Combination of the Taguchi Method and a Neural-Genetic Approach

机译：田口法与神经遗传学相结合的GTA焊接工艺优化
- 作者：HSUAN-LIANG LIN;CHANG-PIN CHOU
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Gas tungsten arc welding;
- Genetic algorithm;
- Neural networks;
- Taguchi method;
40.DNA Functionalized Carbon Nanotubes for Nonbiological Applications

机译：DNA功能化碳纳米管用于非生物应用
- 作者：AMBARISH PAUL;BAIDURYA BHATTACHARYA
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Carbon nanotube;
- Characterization;
- Deoxyribonucleic acid;
- Functionalized;
- Non-covalent;
- Sensors;
41.Mechanical Property Development During UOE Forming of Large Diameter Pipeline Steels

机译：大直径管线钢UOE成形过程中的力学性能发展
- 作者：A. G. KOSTRYZHEV;M. STRANGWOOD;C. L. DAVIS
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第3期
- Bauschinger effect;
- Pipeline steel;
- UOE pipes;
- Work hardening;
42.A Super Surface Finish Module by Simultaneous Influences from Electromagnetic Force and Ultrasonic Vibrations

机译：同时受电磁力和超声波振动影响的超级表面处理模块
- 作者：P. S. PA
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- ACD 37;
- Electrofinishing;
- Magnetic force;
- Simultaneous influences;
- Super surface finish;
- Ultrasonic energy;
43.Grain Structure Development during Reheating and Deformation of Niobium-Microalloyed Steels

机译：铌微合金钢在加热和变形过程中的晶粒结构发展
- 作者：A. KUNDU;C. L. DAVIS;M. STRANGWOOD
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第3期
- Bimodal grain structure;
- Deformation;
- Microalloyed steel;
- Precipitation;
- Recrystallization;
- Segregation;
44.Synthesis and Characterization of Lithium-Doped Tin Dioxide Nanocrystalline Powders by Emulsion Combustion Method

机译：乳化燃烧法合成锂掺杂二氧化锡纳米晶粉及其表征
- 作者：J. CHANDRADASS;KI HYEON KIM
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
45.Effect of Mechanical Anisotropy on-Grinding of CdZnTe Wafers

机译：机械各向异性对CdZnTe晶圆研磨的影响
- 作者：YAN LI;RENKE KANG;HANG GAO;DONGJIANG WU
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- Anisotropy;
- CdZnTe;
- Embedded abrasives;
- Frictional coefficient;
- Grinding;
- Lapping process;
- Nanoindentation;
- Nanoscratch;
- Slip system;
46.Effect of MQL on Surface Roughness in Milling-of AA7075-T6

机译：MQL对AA7075-T6铣削表面粗糙度的影响
- 作者：NIHAT TOSUN;MESUT HUSEYINOGLU
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Aluminum;
- ANOVA;
- Milling;
- MQL;
- Surface roughness;
47.Influence of Die Surface Textures during Metal Forming—A Study Using Experiments and Simulation

机译：模具表面纹理在金属成形过程中的影响-基于实验和模拟的研究
- 作者：PRADEEP L. MENEZES;KISHORE;SATISH V. KAILAS
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- FE-simulation;
- Friction;
- Surface texture;
- Transfer layer;
48.Fiber Bragg Gratings Array for Structural Health Monitoring

机译：光纤布拉格光栅阵列用于结构健康监测
- 作者：B.L.CHEN;C.S.SHIN
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- Fiber Bragg grating sensor;
- Impact monitoring;
- Impact source location;
- Structural health monitoring system;
49.Biaxial Stressing of Sheets of Friction Stir Processed Aluminum Alloy A319

机译：搅拌摩擦铝合金A319板材的双轴应力。
- 作者：L. Karthikeyan;V. S. Senthilkumar;K. A. Padmanabhan
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Biaxial stressing;
- Friction stir processing;
- Hemispherical dome formation;
- A319 alloy;
50.Surface Modification of AISI 4140 Steel Using Electrolytic Plasma Thermocyclic Treatment

机译：电解等离子体热循环处理AISI 4140钢的表面改性
- 作者：L. CENK KUMRUOGLU;AHMET OZEL
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Electrolytic;
- Hardening;
- Heat treatment;
- Modification;
- Quenching;
- Plasma;
- SEM;
- XRD;
- 4140;
51.Assessing the Validity of Original and Modified Failure Criteria to Predict the Forming Limit of Unwelded and Tailor Welded Blanks with Longitudinal Weld

机译：评估原始和修改后的失效准则的有效性，以预测纵向焊接的非焊接和定制焊接毛坯的成形极限
- 作者：R. Ganesh Narayanan;B. S. Naik
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Failure;
- Prediction;
- Steel;
- Stretching;
- Weld;
52.DANIELI-CQE: System for Controlling Mechanical Properties of Hot-Rolled Coil

机译：DANIELI-CQE：热轧卷机械性能控制系统
- 作者：ANANYA MUKHOPADHYAY;ANDREA POLO;FEDERICO PEROTTI
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第3期
- Coil quality estimator;
- Danieli;
- Hot rolled coil;
- Mechanical properties;
- Process control;
- Rolling;
53.Parameter Optimization of Ultrasonic Machining Process Using Nontraditional Optimization Algorithms

机译：基于非传统优化算法的超声加工工艺参数优化
- 作者：Ravipudi Venkata Rao;P. J. Pawar;J. P. Da vim
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- ABC;
- HS;
- Optimization;
- PSO;
- Ultrasonic machining;
54.A Study of Multiobjective Parametric Optimization of Silicon Abrasive Mixed Electrical Discharge Machining of Tool Steel

机译：工具钢硅磨料混合放电加工的多目标参数优化研究
- 作者：Anil Kumar;S. Maheshwari;C. Sharma
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
55.Reverse Solidification Path Methodology for Dewaxing Ceramic Shells in Investment Casting Process

机译：熔模铸造过程中陶瓷壳脱蜡的反向凝固路径方法学
- 作者：Sarika Mishra;Rati Ranjana
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Investment casting;
- Reverse solidification;
- Thermal heating;
56.Effect of Traverse Speed on Abrasive Waterjet Machining of Age Hardened Inconel 718 Nickel-Based Superalloy

机译：往复速度对时效Inconel 718镍基高温合金磨料水射流加工的影响
- 作者：Mustafa Ay;UlaS CaydaS;Ahmet Hascalik
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- AFM;
- Age hardening;
- AWJ;
- Inconel 718;
- Traverse speed;
57.Synthesis and Characterization of SiO_2Coating - on Cast Pure Titanium

机译：铸造纯钛表面SiO_2涂层的合成与表征。
- 作者：LITONG GUO;LIZHI GUO;YABO ZHU;CHENG XU;HUA ZHU;TIANWEN GUO
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Bonding;
- Cytotoxicity;
- SiO_2;
- Sol-gel;
- Titanium;
58.The Effect of Processing Conditions and Cooling Rate on the Microstructure and Properties of API X-70 and API X-100 Steels

机译：加工条件和冷却速率对API X-70和API X-100钢的组织和性能的影响
- 作者：X. YANG;M. SALEM;E. J. PALMIERE
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第3期
- Accelerated cooling;
- Deformation simulations;
- Pipeline steels;
- Plane strain compression;
59.Control of Structures and Properties of Cold-Rolled Sheet Steels

机译：冷轧薄钢板的组织和性能控制
- 作者：KOHSAKU USHIODA;SHIGETO TAKEBAYASHI;YOSHIO R. ABE
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第3期
- Grain growth;
- High strength steel;
- Mild steel;
- Phase transformation;
- Precipitation;
- Property;
- Recrystallization;
- Steel;
- Structure;
- Texture;
- TRIP Steel;
60.Study on Diamond Cutting of Nonrationally Symmetric Microstructured Surfaces with Fast Tool Servo

机译：快速刀具伺服非对称对称微结构表面的金刚石切削研究
- 作者：M. ZHOU;H. J. ZHANG;S. J. CHEN
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- Diamond tool;
- Fast tool servo;
- Nonrationally symmetric surfaces;
- Tool path;
61.Analysis and FEM Simulation of Temperature Field in Wet Surface Grinding

机译：湿式表面磨削温度场的分析与有限元模拟
- 作者：C. MAO;Z. X. ZHOU;Y. H. REN;B. ZHANG
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- Grinding;
- Simulation;
- Temperature;
62.Modeling and Analysis of Surface Roughness Parameters in Drilling GFRV Composites Using Fuzzy-Logic

机译：基于模糊逻辑的GFRV复合材料表面粗糙度参数建模与分析
- 作者：B. LATHA;V. S. SENTHILKUMAR
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- ANOVA;
- Artificial intelligence;
- Drilling;
- Fuzzy logic;
- GFRP composites;
- Pareto;
- Surface roughness;
63.Experimental Investigations on Ice Bonded Abrasive Polishing of Copper Materials

机译：铜材料的冰粘结磨料抛光实验研究
- 作者：R. Mohan;N. Ramesh Babu
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Abrasives;
- Ice;
- Polishing;
- Ultrafine;
- Unconventional;
64.Optimal Design of Smart Laminated Composite Structures

机译：智能层合复合结构的优化设计
- 作者：ALEKSANDER MUC;PIOTR KEDZIORA
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- Actuators;
- Composite structures;
- Optimal design;
65.On the Direct Diffusion Bonding of Titanium Alloy to Stainless Steel

机译：钛合金与不锈钢的直接扩散结合
- 作者：Swarup K. Ghosh;S. Chatterjee
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Diffusion bonding;
- Microstructure;
- Stainless steel;
- Tensile strength;
- Titanium alloy;
66.Multiple-Step Incremental Air-Bending Forming of High-Strength Sheet-Metal Based on Simulation Analysis

机译：基于模拟分析的高强度薄板金属多步增量弯曲成形
- 作者：ZEMIN FU;JIANHUA MO
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
67.Optimization of Material Removal Rate in Micro- EDM Using Artificial Neural Network and Genetic Algorithms

机译：基于人工神经网络和遗传算法的微细电火花加工材料去除率优化
- 作者：K. P. SOMASHEKHAR;N. RAMACHANDRAN;JOSE MATHEW
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
68.Finite Element Simulation of Cold Isostatic Pressing of the Selective Laser-Sintered Components

机译：选择性激光烧结零件冷等静压的有限元模拟
- 作者：Y. Y. Du;Y. S. Shi;Q. S. Wei
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Cold;
- Pressing;
- Simulation;
- Sintering;
- Steel;
69.Microstructure and Properties of the Spray-Formed and Extruded 7075 Al Alloy

机译：喷射成型挤压7075铝合金的组织与性能
- 作者：M. JEYAKUMAR;S. KUMAR;G. S. GUPTA
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Aluminum alloy;
- Extrusion;
- Microstructure;
- Porosity;
- Spray forming;
- Tensile properties;
70.Austenite Grain Ultrarefinement and the Formation of Nanocrystallized Structure through Transformation of Low Carbon Steels

机译：奥氏体晶粒超细化和低碳钢相变形成纳米晶组织
- 作者：LINXIU Du;SHENGJIE YAO;MINGXIAN XIONG
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第3期
- Deformation;
- Grain ultrarefinement;
- Nanocrystallization;
- Steel;
- Transformation;
71.Surface Modification of Ti Dental Implants by Grit- Blasting and Micro-Arc Oxidation

机译：喷砂和微弧氧化处理钛种植体的表面改性
- 作者：YEON-WOOK KIM
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- Grit-blasting;
- Micro-arc oxidation;
- Nanosized pores;
- Osteoblastic adhesion;
- Titanium dental implant;
- TiO_2 layer;
72.An Innovative Fabrication Process of Porous Metal Fiber Sintered Felts with Three-Dimensional Reticulated Structure

机译：具有三维网状结构的多孔金属纤维烧结毡的创新制造工艺
- 作者：YONG TANG;WEI ZHOU;JIANHUA XIANG;WANGYU LIU;MINQIANG PAN
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Copper fiber;
- Metal fiber sintered felt;
- Porous metal;
- Sintering;
73.Fabrication and Characterization of Aluminum Fibers by Peripheral Milling

机译：铝纤维的外围铣削加工与表征
- 作者：Yong Tang;Zhanshu He;Minqiang Pan
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Aluminum;
- Cutting;
- Deformation;
- Fiber;
- Machining;
- Manufacturing;
- Milling;
- Surface;
74.An isotropic Damage Mechanism during Grinding of CdZnTe Wafers

机译：CdZnTe晶片研磨过程中的各向同性损伤机理
- 作者：YAN LI;HANG GAO;RENKE KANG;DONGJIANG WU
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- CdZnTe;
- Cleavage plane;
- Damage;
- Grinding wheel;
- Plastic deformation;
- Subsurface;
- Surface;
- Stacking faults;
75.Ultrafine Grained Material Produced by Machining

机译：机械加工生产的超细颗粒材料
- 作者：W. J. DENG;W. XIA;C. Li;Y. TANG
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
76.The Effect of Reaction Temperature on the Tribological Behavior of the Surface Modified Silicon Carbide by the Carbide Derived Carbon Process

机译：反应温度对碳化物衍生碳法处理表面改性碳化硅摩擦学行为的影响
- 作者：HEUNG-TAEK BAE;HYUN-JU CHOI;JI-HOON JEONG;DAE-SOON LIM
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第6期
- Carbide derived carbon (CDC);
- Friction coefficient;
- Partially transformed carbon layer;
- SiC;
- Tribology;
- Wear rate;
77.Synthesis of Monodisperse Magnetite Nanocrystals via Partially Reduced Precipitation Method

机译：部分还原沉淀法合成单分散磁铁矿纳米晶
- 作者：JUN LIANG;LI Li;MIN Luo;LIFENG WANG;RIR YANG
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第9期
- Chemical precipitation approach;
- Hydroxylammonium chloride;
- Magnetite;
- Nanocrystal;
- Partial deoxidization;
- TEM;
- XPS;
- XRD;
78.Microelectrode Tools Manufacturing by Hybrid Circuits Twin-Wire Electrodischarge Grinding

机译：混合电路双线放电磨削制造微电极工具
- 作者：Dong-Yea Sheu
- 期刊名称：《Materials and Manufacturing Processes》 | 2010年第12期
- Micro-EDM;
- Microtools;
- Twin WEDG;
- WEDG;
79.Microstructure and Mechanical Properties of Cast Composites of Steel Wool Infiltrated by Magnesium and AZ91 Alloy

机译：镁和AZ91合金渗入的钢丝绒浇铸复合材料的组织和力学性能
- 作者：Ramalingaiah;Sandeep Bansal;Subrata Ray
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第9期
- AZ91 alloy;
- Composite;
- Magnesium;
- Steel wool;
80.Experimental Investigation and Analysis of Thrust Force in Drilling Hybrid Metal Matrix Composites by Coated Carbide Drills

机译：涂层硬质合金钻头钻削混合金属基复合材料的推力实验研究与分析
- 作者：T. Rajmohan;K. Palanikumar
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第9期
- Drilling;
- Hybrid composites;
- Response surface methodology;
- Thrust force;
81.Synthesis of Al_2O_3-(Co, Ni) Cermets via Thermal Explosion Method

机译：热爆法合成Al_2O_3-（Co，Ni）金属陶瓷
- 作者：Tao Lu;Ye Pan
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第12期
- Alloys;
- Cermet;
- Magnetic;
- Microstructure;
- Pressure;
- Reactions;
- Synthesis;
- Thermochemical;
82.Evaluation of Boron Containing Clay Wastes in Cement Production

机译：水泥生产中含硼粘土废物的评价
- 作者：M. OZDEMIR;A. UGURLU
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第9期
- Boron;
- Cement;
- Durability;
- Evaluation;
- Strength;
- Waste;
83.Study and Selection of the Most Appropriate Filler Materials for an Al/Cu Brazing Joint in Cooling Circuits

机译：冷却回路中铝/铜钎焊接头最合适的填充材料的研究与选择
- 作者：Carlos Berlanga-Labari;A. Albistur-Goni;P. Balerdi-Azpilicueta
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第3期
- Aluminum;
- Brazing;
- Copper;
- Diffusion;
- Filler materials;
84.Comparative Study of Specific Plowing Energy for Mild Steel and Composite Ceramics Using Single Grit Scratch Tests

机译：使用单粒划痕试验比较低碳钢和复合陶瓷的特定耕作能量
- 作者：VIJAYENDER SINGH;SUDARSAN GHOSH;P. VENKATESWARA RAO
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第3期
- Composite ceramics;
- Groove;
- Grit;
- Plowing;
- Scratch;
85.Dynamic Fracture Strength and Toughness of Continuous Alumina Fiber–Reinforced Glass Matrix Composites at Elevated Temperature

机译：高温下连续氧化铝纤维增强玻璃基复合材料的动态断裂强度和韧性
- 作者：Ramadan J. Mustafa;Ali A. Al-Hamdan;Yassin L. Nimir
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第6期
- Dynamic fracture strength;
- Elevated temperatures;
- Fiber reinforced glass matrix composites;
- Toughness;
86.Fabrication of Ni-Plaque-Based Manganese Dioxide Electrodes for Electrochemical Supercapacitors

机译：电化学超级电容器用Ni斑基二氧化锰电极的制备
- 作者：Yaohui Wang;Quan Min Yang;Igor Zhitomirsky
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第6期
- Capacitance;
- Electrosynthesis;
- Impregnation;
- Manganese dioxide;
- Nickel plaque;
- Reduction;
- Supercapacitor;
87.Genetic Algorithm Applied to Investigate Cutting Process Parameters Influence on Workpiece Price Formation

机译：遗传算法研究切削参数对工件价格形成的影响
- 作者：Andre Felipe Henriques Librantz;Nivaldo Lemos Coppini;Elesandro Antonio Baptista
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第3期
- Artificial intelligence;
- Contribution margin;
- Cutting process;
- Genetic algorithm;
- Parameters optimization;
88.A Study of the Physical and Mechanical Properties of Paper Made from Agave americana L. Fibers

机译：龙舌兰纤维制纸的物理机械性能研究
- 作者：Mounir Jaouadi;Slah Msahli;Faouzi Sakli
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第6期
- Agave americana L.;
- Overlaid contours;
- Paper;
- Pulp;
- Technical fiber;
89.Improving Corrosion Resistance of Ti–TiB Composite Using Gas Tungsten Arc Heating

机译：钨极电弧加热提高Ti-TiB复合材料的耐蚀性
- 作者：P. Chandrasekar;V. Vijay;V. Balusamy;P. Chandramohan
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第6期
- Gas tungsten arc heating;
- Metal matrix composites;
- Potentiodynamic polarization;
- Scanning electron microscopy;
90.Experimental Investigations on Drilling GFRP Epoxy Composite Laminates Using Specialized and Conventional Uncoated Cemented Carbide Drills

机译：使用专用和常规未涂层硬质合金钻头钻制GFRP环氧复合材料层压板的实验研究
- 作者：Ali Faraz;Tobias Heymann;Dirk Biermann
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第6期
- Delamination;
- Drilling;
- GFRP;
- Laminate;
- Pilot-hole;
- Thrust;
91.Orthogonal Micro-Grooving of Anisotropic Pyrolytic Carbon

机译：各向异性热解碳的正交微沟槽
- 作者：Vivek Bajpai;Ramesh K. Singh
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第12期
- Anisotropic material;
- Micromachining;
- Orthogonal micro-grooving;
- Pyrolytic carbon;
92.Preparation of a Functionally Gradient Aluminum Alloy Metal Matrix Composite Using the Technique of Spray Deposition

机译：喷雾沉积技术制备功能梯度铝合金金属基复合材料
- 作者：J. L. Shi;H. G. Yan;B. Su
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第12期
- Functionally gradient material;
- Preparation;
- Spray deposition;
- 6066Al/SiC_P.;
93.Effects of Rapid Heating on Microstructure and Mechanical Properties of Modified Vibrated Al-Si-Mg Alloys Using a Fluidized Bed

机译：快速加热对流化床改性振动Al-Si-Mg合金组织和力学性能的影响
- 作者：N. H. S. Swamy;M. A. Joseph;N. M. Nagarajan
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第3期
- Al-Si-Mg alloys;
- Heat-treatment;
- Modification;
- Microstructure;
- Properties;
- Vibration;
94.Experimental Study of the Effect of Pulsewidth on Ablation of Silicon Substrate Using Mega Hertz Repetition Rate Femtosecond Laser

机译：兆赫兹重复频率飞秒激光对脉宽对硅衬底烧蚀影响的实验研究
- 作者：Nitin Sudani;Krishnan Venkatakrishnan;Bo Tan
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第6期
- Femtosecond laser;
- Laser ablation;
- Laser materials processing;
- Micromachining;
- Pulsewidth;
- Silicon;
- Wafer dicing;
95.Effect of Titanium-Aluminum Ratio on the Thermal Explosion Processing of TiAl-TiB_(0.6) Layered Composites

机译：钛铝比对TiAl-TiB_（0.6）层状复合材料热爆炸过程的影响
- 作者：Laszlo Kecskes;Brady Butler;George Oniashvili
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第9期
- Aluminum;
- Boron;
- Combustion synthesis;
- Reaction mechanism;
- SHS;
- Titanium;
- Thermal explosion;
96.Investigating the Role of Nonmetallic Fillers in Particulate-Reinforced Mold Composites using EAs

机译：使用EA调查非金属填料在颗粒增强型模具复合材料中的作用
- 作者：Arup Kumar Nandi;Shubhabrata Datta;Kalyanmoy Deb
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第3期
- Composites;
- Cooling-time;
- Evolutionary algorithm;
- Multiobjective;
- Nonmetallic;
- Soft tooling;
97.Weldability of AISI 430/AISI1030 Steel Couples via the Synergic Controlled Pulsed (GMAW-P) and Manual Gas Metal Arc (GMAW) Welding Techniques

机译：AISI 430 / AISI1030钢对通过可控脉冲（GMAW-P）和手工气体保护电弧（GMAW）焊接技术的可焊性
- 作者：Tanju Teker;Turhan Kursun
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第9期
- GMAW-P;
- Mechanical;
- Welding;
98.Comparative Analysis of Actual Processing Conditions in ECAE between FEM and Both Analytical and Experimental Results

机译：有限元法与分析和实验结果之间ECAE实际加工条件的比较分析
- 作者：Carmelo J. Luis Perez;Rodrigo Luri
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第9期
99.Fabrication of TiO_2 Nano-Oils by a Plasma Arc Nanoparticles Synthesis System

机译：等离子弧纳米粒子合成系统制备TiO_2纳米油
- 作者：Mu Jung Kao;Cheng Chi Yu;Kuohsiu David Huang
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第12期
- Lubrication;
- Nano-oils;
- Viscosity;
100.Performance Evaluation of Different Twist Drills in Dry Drilling of AISI 304 Austenitic Stainless Steel

机译：AISI 304奥氏体不锈钢干钻中不同麻花钻的性能评估
- 作者：Ulas Caydas;Ahmet Hascalik;Omer Buytoz
- 期刊名称：《Materials and Manufacturing Processes》 | 2011年第9期
- AISI 304;
- Burr formation;
- Dry drilling;
- Drill type;
- TiN-coating;

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有出版物经营许可证

客服微信
服务号