...
首页> 外文期刊>Geo-marine letters >Mud depocenters on continental shelves-appearance, initiation times, and growth dynamics
【24h】

Mud depocenters on continental shelves-appearance, initiation times, and growth dynamics

机译:泥浆集中在大陆架上-外观,起始时间和生长动力

获取原文
获取原文并翻译 | 示例

摘要

Mud accumulates on continental shelves under a variety of environmental conditions and results in a diverse formation of mud depocenters (MDCs). Their three-dimensional architectures have been in the focus of several recent studies. Due to some terminological confusion concerning MDCs, the present study sets out to define eight individual MDC types in terms of surface sediment distribution and internal geometry. Under conditions of substantial sediment supply, prodeltas (distal zones off river deltas; triangular sheets), subaqueous deltas (disconnected from deltas by strong normal-to-shore currents; wedge-like clinoforms), and mud patches (scattered distribution) and mud blankets (widespread covers) are formed. Forced by hydrodynamic conditions, mud belts in the strict sense (detached from source; elongated bodies), and shallow-water contourite drifts (detached from source; growing normal to prevailing current direction; triangular clinoforms) develop. Controlled by local morphology, mud entrapments (in depressions, behind morphological steps) and mud wedges (triangular clinoforms growing in flow direction) are deposited. Shelf mud deposition took place (1) during early outer-shelf drowning (similar to 14 ka), (2) after inner-shelf inundation to maximum flooding (9.5-6.5 ka), and (3) in sub-recent times (< 2 ka). Subsequent expansion may be (1) concentric, in cases where the depocenter formed near the fluvial source, (2) uni-directional, extending along advective current transport paths, and (3) progradational, forming clinoforms that grow either parallel or normal to the bottom current direction. Classical mud belts may be initiated around defined nuclei, the remote sites of which are determined by seafloor morphology rather than the location of the source. From a stratigraphic perspective, mud depocenters coincide with sea-level highstand-related, shelf-wide condensed sections. They often show a conformable succession from transgressive to highstand systems tract stages.
机译:在各种环境条件下,泥浆会堆积在大陆架上,导致泥浆沉积中心(MDC)形成多种形式。他们的三维架构一直是近期研究的重点。由于有关MDC的一些术语混淆,本研究着手从表面沉积物分布和内部几何形状定义八种MDC类型。在大量泥沙供应的条件下,三角洲(三角洲以外的偏远地区;三角片),水下三角洲(由于强烈的正向-陆流与三角洲断开;楔形斜面形),泥块(分散分布)和泥覆盖层(广泛的封面)形成。在水动力条件的作用下,严格意义上的泥浆带(与水源分离;拉长的物体)和浅水contour石漂移(与水源分离;垂直于主要水流方向生长;三角斜形)形成。受局部形态学控制,沉积了泥浆(在凹陷中,在形态学步骤之后)和泥楔(在流动方向上生长的三角斜形)。架子上的泥浆沉积发生在(1)早期外部淹没期间(类似于14 ka),(2)在内部淹没至最大洪水(9.5-6.5 ka)之后,以及(3)在最近的时间(< 2 ka)。随后的膨胀可能是(1)在河流源附近形成沉积中心时是同心的;(2)沿对流电流传输路径单向延伸;(3)渐进形成与水平面平行或垂直生长的斜面形。底部电流方向。可以在限定的核周围启动经典的泥带,其远处是由海底形态而不是源位置决定的。从地层学角度来看,泥浆沉积重心与海平面高位相关的,陆架范围的冷凝段重合。它们通常表现出从海侵系统到高潮系统阶段的顺次继承。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号