首页> 外文期刊>European Polymer Journal >Investigation of silk sericin conformational structure for fabrication into porous scaffolds with poly(vinyl alcohol) for skin tissue reconstruction
【24h】

Investigation of silk sericin conformational structure for fabrication into porous scaffolds with poly(vinyl alcohol) for skin tissue reconstruction

机译:丝胶蛋白构象结构研究的聚乙烯醇制备多孔支架,用于皮肤组织重建

获取原文
获取原文并翻译 | 示例
           

摘要

This work is concerned with the study of the conformational structure and crystallinity of sericin from silk cocoon (Bombyx mori) and the role these play in the physical and chemical properties of the final materials. Silk sericin (SS) powders were prepared by degumming processes with different storage temperatures before drying into the final powders; defined as RT-SS (room, 25 degrees C), C-SS (10 degrees C) and F-SS (freezing, 0 degrees C), and then fabricated into films and scaffolds by reacting with poly(vinyl alcohol) (PVA) in the presence of a new cross-linker (dimethylolurea; DMU). RT-SS and C-SS structures favour random coil structuring as witnessed by Amide I (C=O stretching), II (N-H bending) and III (in phase combination of N-H in plane-bending and C-N stretching vibrations) being observed at 1661, 1538, and 1232 cm(-1), respectively. Whereas, F-SS favours beta-sheets structure proved by the amide bands shifting to a lower frequency. The N-H stretching (3200-2400 cm(-1)) of F-SS is also observed at a lower frequency with a broader band than RT-SS and C-SS due to the hydrogen bonding in the beta-sheets. The differences in the X-ray peaks between RT- and C-SS (d spacing = 1.9-5.2 angstrom) and F-SS (d spacing = 3.0 angstrom and 5.2-8.2 angstrom) were also measured. Films of PVA/RT-SS/DMU showed better properties than that of PVA/F-SS/DMU films in terms of the interactions (hydrogen bonding) between the components that formed the network. Therefore, RT-SS was chosen for the preparation of 3D porous scaffolds with different concentrations of DMU. All scaffolds showed good support for skin fibroblast cells, as well as promoted cell proliferation. However, a minimal amount of cross-linker, 10% DMU PVA/RT-SS scaffold with average pore diameter between 20 and 30 mu m, was the best composition for cell viability and cell adhesion. In this work, therefore, a novel scaffold based on biomaterials was explored for tissue engineering scaffolds with the potential to be a new technology platform for skin tissue regeneration. (C) 2016 Elsevier Ltd. All rights reserved.
机译:这项工作涉及丝茧(Bombyx mori)的丝胶蛋白的构象结构和结晶度的研究,以及它们在最终材料的物理和化学性质中的作用。丝胶蛋白(SS)粉末是通过在不同的储存温度下脱胶的方法制备的,然后干燥成最终的粉末。定义为RT-SS(室温25摄氏度),C-SS(10摄氏度)和F-SS(冷冻0摄氏度),然后通过与聚乙烯醇(PVA)反应制成薄膜和支架)存在新的交联剂(二甲基羟脲; DMU)。 RT-SS和C-SS结构有利于随机线圈结构,如1661年观察到的酰胺I(C = O拉伸),II(NH弯曲)和III(NH在平面弯曲和CN拉伸振动中的相结合)所证明的,1538和1232 cm(-1)。而F-SS则倾向于通过酰胺带移至较低频率来证明β-折叠结构。由于β-折叠中的氢键作用,F-SS的N-H拉伸(3200-2400 cm(-1))也以比RT-SS和C-SS更低的频率和更宽的频带被观察到。还测量了RT-和C-SS(d间距= 1.9-5.2埃)和F-SS(d间距= 3.0埃和5.2-8.2埃)之间的X射线峰的差异。就组成网络的组件之间的相互作用(氢键)而言,PVA / RT-SS / DMU薄膜的性能优于PVA / F-SS / DMU薄膜。因此,选择RT-SS制备具有不同DMU浓度的3D多孔支架。所有支架均显示出对皮肤成纤维细胞的良好支持,并促进了细胞增殖。然而,最少量的交联剂,10%DMU PVA / RT-SS支架(平均孔径在20和30μm之间)是细胞活力和细胞粘附的最佳组合物。因此,在这项工作中,探索了一种基于生物材料的新型支架,用于组织工程支架,有望成为皮肤组织再生的新技术平台。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号