Stem mapping and estimating standing volume from stereoscopic hemispherical images

摘要

Sustainable forest management requires knowledge of forest structure and dynamics as well as an estimation of growing stock. The forest inventory provides the data for estimating stand variables. The measurement device MU2005-01738, patented by the Center for Forest Research (MA-CIFOR), provides stereoscopic hemispherical images which can allow the 3D restoration of the stand around the sampling point. The aim of this study is to develop a methodology for forest stand mapping as well as tree diameter and height measurement along with volume estimation from the stereoscopic hemispherical images provided by the MU2005-01738. Using the MU2005-01738, Eucalyptus globulus La-bill, plantations were sampled. Distance, diameter, height and volume were derived from the stereoscopic hemispherical images of 30 trees located at distances ranging from 0 to 15 m from the device. These variables were then compared with field measurements and the estimation errors analyzed. The (root-mean-squared error) RMSE was 0.23 m (8.95 %) for tree position and 1.51 cm (10.43 %) for diameter at breast height measurement at distances of less than 8 m. In the case of stem height and individual tree volume estimation, the RMSE was 2.59 m (23.05 %) and 0.025 m3 (17.94 %), respectively. The analysis of measurement errors indicated that the measurement precision decreases beyond 8 m from the device as well as for directions close to the baseline (the line between the optical centers of the two images), whereas the precision was highest for directions near to the line which is perpendicular to the base line. Future research should focus on improving measurement accuracy and possible applications in the field of forestry of the techniques presented in this study.