In this work, a new aluminum gate chemical mechanical planarization (CMP) model for material removal rate (MRR) is proposed in high-k metal gate (HKMG) process. Using the basic principles of steady-state oxidation reaction and mechanical abrasion mechanism, the combinational interaction of chemical and mechanical coupled effects on MRR was systematically described by process parameters, pad properties and concentration of oxidizer, and then balanced to construct an overall polishing rate. Because of the great significance of the slurry pH on MRR in CMP process, the effects of surface forces, including the influences of van der Waals (vdW) and double-layer (DL) forces simultaneously acted between the wafer and the particles were investigated. Meanwhile, the influence of particle sizes, abrasive loadings and zeta potentials of the wafer and particles on MRR was also analyzed. It is found that the attractive vdW forces strengthen the MRR, while the DL forces, calculated to be repulsive, lower the MRR. The magnitude of surface forces increases with a smaller particle size compared with the pad-particle force. When zeta potentials of the wafer and particles are considered as a function of slurry pH, the experimental trends for the MRR with slurry pH, applied pressure and abrasive loading were predicted well by the present model. Therefore, the governing equation of aluminum removal reveals some insights into the HKMG CMP process and can be utilized for optimizing and controlling the polishing rate of aluminum gate structures and performing sensitivity analyses of operating parameters. (C) The Author(s) 2015. Published by ECS. All rights reserved.
展开▼
