...
首页> 外文期刊>Investigative radiology >Targeting liver lesions for radiofrequency ablation: an experimental feasibility study using a CT-US fusion imaging system.
【24h】

Targeting liver lesions for radiofrequency ablation: an experimental feasibility study using a CT-US fusion imaging system.

机译:针对射频消融的肝脏病变:使用CT-US融合成像系统进行的实验可行性研究。

获取原文
获取原文并翻译 | 示例

摘要

PURPOSE: To investigate the feasibility and validity of real-time guidance using a fusion imaging system that combines ultrasound (US) and computed tomography (CT) in the targeting and subsequent radiofrequency (RF) ablation of a liver target inconspicuous on US. METHODS AND MATERIALS: The study was designed as an experimental ex vivo study in calf livers with radiopaque internal targets, inconspicuous at US, simulating a focal liver lesion. The study included 2 phases. The initial phase was to examine the feasibility of matching preprocedural volumetric CT data of the calf livers with real-time US using a commercially available multimodality fusion imaging system (Virtual Navigator System, Esaote SpA, Genoa, Italy), and to assess the accuracy of targeting using a 22 gauge cytologic needle. The second phase of the study was to validate such a technique using a 15 gauge RF multitined expandable needle (RITA Medical Systems, Mountain View, CA) and to examine the accuracy of the needle placement relative to the target. The tip of the trocar of the RF needle had to be placed 1 cm from the target and then the hooks had to be deployed to 3 cm. Unenhanced CT of the liver and multiplanar reconstructions were performed to calculate accuracy of positioning, ie, the lateral distance between the needle and the target, the distance between the tip of the trocar of the RF electrode and the target, and the lateral distance between the central tine of the RF electrode and the target. RESULTS: All calf livers underwent successful CT-US registration with a mean registration error of 3.0 +/- 0.1 mm and 2.9 +/- 0.1 mm in the initial and second phase of the study, respectively. In the initial phase an overall number of 24 insertions were performed after the US-CT guidance. The mean needle to target distance was 1.9 +/- 0.7 mm (range, 0.8-3.0 mm). In the second phase an overall number of 12 ablations were performed. The mean target-trocar distance was 10.3 +/- 2.6 mm. The mean target-central tine lateral distance was 3.9 +/- 0.7 mm (range, 2.9-5.1 mm). After the dissection of the specimen the target was found unchanged in the center of the ablation zone in all cases. CONCLUSION: Real-time registration and fusion of preprocedure CT volume images with intraprocedure US is feasible and accurate. The study was however conducted in an ideal experimental setting, without patient movements and breathing, and further studies are warranted to validate the system under clinical conditions.
机译:目的:研究融合超声成像系统的实时指导的可行性和有效性,该融合成像系统将超声(US)和计算机断层扫描(CT)相结合,以靶向和随后射频(RF)消融在美国不起眼的肝靶标。方法和材料:本研究是在具有不透射线内部靶标的小牛肝脏中进行的一项体外实验研究,在美国并不明显,它模拟了肝脏局灶性病变。该研究包括两个阶段。初始阶段是使用商用多模态融合成像系统(Virtual Navigator System,Esaote SpA,意大利热那亚)检查小腿肝脏的术前体积CT数据与实时US匹配的可行性,并评估使用22号细胞学针进行靶向。研究的第二阶段是使用15号射频多头可扩展针头(RITA Medical Systems,Mountain View,CA)验证这种技术,并检查针头相对于目标物的放置精度。 RF针的套管针尖端必须距目标1 cm,然后将钩子展开至3 cm。进行肝脏未增强的CT和多平面重建,以计算定位的准确性,即,针与靶之间的横向距离,射频电极的套管针尖端与靶之间的距离以及靶与靶之间的横向距离。射频电极和目标的中心齿。结果:所有小牛肝均成功进行了CT-US配准,在研究的初始阶段和第二阶段均平均配准误差分别为3.0 +/- 0.1 mm和2.9 +/- 0.1 mm。在初始阶段,按照US-CT指南进行了总共24次插入。针到目标的平均距离为1.9 +/- 0.7毫米(范围0.8-3.0毫米)。在第二阶段,总共进行了12次消融。目标套管针的平均距离为10.3 +/- 2.6 mm。平均目标中心齿的横向距离为3.9 +/- 0.7毫米(范围为2.9-5.1毫米)。解剖标本后,在所有情况下都未发现目标位于消融区中心。结论:术前CT容积图像与术中US的实时配准和融合是可行和准确的。但是,该研究是在理想的实验环境中进行的,没有患者的活动和呼吸,并且有必要进行进一步的研究以在临床条件下验证该系统。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号