首页> 外文期刊>International Journal of Automotive Technology >A COMPARATIVE STUDY ON THE POWER CHARACTERISTICS AND CONTROL STRATEGIES FOR PLUG-IN HYBRID ELECTRIC VEHICLES
【24h】

A COMPARATIVE STUDY ON THE POWER CHARACTERISTICS AND CONTROL STRATEGIES FOR PLUG-IN HYBRID ELECTRIC VEHICLES

机译:插电式混合动力汽车的功率特性和控制策略的比较研究

获取原文
获取原文并翻译 | 示例
           

摘要

A comparative study was performed on two types of plug-in hybrid electric vehicles (PHEVs): the GM Volt and the Toyota Prius Plug-in Hybrid. First, the powertrain models of the two vehicles were derived. Based on the dynamic models, a detailed component control algorithm was developed for each PHEV. Specifically, a control algorithm was proposed for motor generator 1 (MG1) and MG2 to achieve optimal engine operation. Additionally, an energy management strategy for selecting the operation mode was developed from the viewpoint of fuel economy, battery state of charge and vehicle velocity. Using the dynamic model of the control algorithm for each PHEV, simulations were performed, and the simulation results were verified by comparing them with those obtained using the Powertrain System Analysis Toolkit simulator for the plug-in Prius. Based on the simulation results, a comparative study was performed, and it was found that the role and capacity of MG1 and MG2 and the mode selection algorithm must be determined depending on the configuration of the PHEV.
机译:对两种类型的插电式混合动力电动汽车(PHEV)进行了比较研究:GM Volt和Toyota Prius插电式混合动力汽车。首先,推导了两种车辆的动力总成模型。基于动态模型,为每个PHEV开发了详细的组件控制算法。具体而言,提出了一种用于电动发电机1(MG1)和MG2的控制算法,以实现最佳的发动机运行。另外,从燃料经济性,电池充电状态和车速的观点出发,开发了用于选择操作模式的能量管理策略。使用每个PHEV的控制算法的动态模型进行仿真,并将仿真结果与使用用于插入式Prius的Powertrain System Analysis Toolkit仿真器获得的仿真结果进行比较,以验证仿真结果。基于仿真结果,进行了比较研究,发现必须根据PHEV的配置确定MG1和MG2的作用和容量以及模式选择算法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号