首页> 外文期刊>Industrial Crops and Products >Extraction of soybean oil using ethanol and mixtures with alkyl esters (biodiesel) as co-solvent: Kinetics and thermodynamics
【24h】

Extraction of soybean oil using ethanol and mixtures with alkyl esters (biodiesel) as co-solvent: Kinetics and thermodynamics

机译:使用乙醇及其与烷基酯(生物柴油)的共溶剂混合物提取大豆油的动力学和热力学

获取原文
获取原文并翻译 | 示例
       

摘要

The kinetics and thermodynamics of soybean extraction using ethanol and ethanol+ alkyl esters mixtures (biodiesel) as co-solvent were investigated. The extraction parameters investigated were temperature (25, 40 and 55 degrees C) and biodiesel to ethanol mass ratio. The extractions were carried out in batch mode at a fixed solvent to soybean mass ratio (4:1). Three different kinetic models were used to correlate the overall extraction curves, namely a first-order, second-order, and a mass transfer model based on Fick's Law. The mass transfer model presented a mean absolute relative deviation of 4.7%, while de. first and second-order models showed values around 10.1% and 4.4%, respectively. From the experimental results obtained, it was observed that higher temperatures affected positively the extraction yields. Furthermore, higher mass ratio of biodiesel to anhydrous ethanol provide higher extraction yields, at temperatures of 25 and 40 degrees C. At 55 degrees C, the extraction yields were not improved when adding the biodiesel as co-solvent to the anhydrous ethanol. On the other hand, using hydrated ethanol as solvent resulted in lower extraction yields, so higher amounts of biodiesel were necessary to reach the same levels of extractions performed using anhydrous ethanol. The thermodynamic analyses showed that both Delta H degrees and Delta S degrees are positive for this process, while negative values of Delta G degrees were found, that means the process evaluated is characterized as endothermic, irreversible and occurs spontaneously. (C) 2015 Elsevier B.V. All rights reserved.
机译:研究了使用乙醇和乙醇+烷基酯混合物(生物柴油)作为助溶剂的大豆提取的动力学和热力学。研究的提取参数为温度(25、40和55摄氏度)和生物柴油与乙醇的质量比。萃取以间歇模式在固定的溶剂与大豆的质量比(4:1)下进行。三种不同的动力学模型用于关联整体提取曲线,即基于菲克定律的一阶,二阶和传质模型。传质模型的平均绝对相对偏差为4.7%,而de。一阶和二阶模型的值分别约为10.1%和4.4%。从获得的实验结果中,观察到较高的温度对提取产率有正面影响。此外,更高的生物柴油与无水乙醇的质量比在25和40摄氏度的温度下提供了更高的提取产率。在55摄氏度时,当将生物柴油作为助溶剂添加到无水乙醇中时,没有提高提取产率。另一方面,使用水合乙醇作为溶剂会导致较低的提取率,因此需要更多量的生物柴油才能达到使用无水乙醇进行的相同提取水平。热力学分析表明,该过程的Delta H度和Delta S度均为正值,而Delta G度为负值,这意味着所评估的过程具有吸热,不可逆且自发发生的特征。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号