...
首页> 外文期刊>Industrial Robot >Super under-actuated multi-fingered mechanical hand with modular self-adaptive gear-rack mechanism
【24h】

Super under-actuated multi-fingered mechanical hand with modular self-adaptive gear-rack mechanism

机译:带有模块化自适应齿轮齿条机构的超欠驱动多指机械手

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Purpose - The purpose of this paper is to present recent work designing a mechanical robotic hand for self-adaptive grasping, human-like appearance, which can be used in a humanoid robot. Conventional robotic devices are relatively complex, large, cumbersome and difficult to be installed in a humanoid robot arm. Under-actuated robot hands use less motors to drive more rotating joints, thus to simplify the mechanical structure, decrease the volume and weight and finally lower the difficulty of control and the cost. Design/methodology/approach - A novel under-actuated finger mechanism is designed, which is based on a gear-rack mechanism, spring constraint and an active sleeve middle phalanx. The principle analyses of its self-adaptive grasp and end power grasping are given. A new multifingered hand named as TH-3R Hand is designed based on the finger. Findings - The design finger mechanism can be used in a robotic hand to make the hand obtain more degrees of freedom (DOF) with fewer actuators, and good grasping function of shape adaptation, decrease the requirement of control system. TH-3R Hand has five fingers, 15 DOF. All fingers are similar. TH-3R Hand has many advantages: it is simple in structure, light in weight, easy to control and low in cost. TH-3R Hand can passively adapt different shapes and sizes of the grasped object. Experimental studies have demonstrated the self-adaptation in grasping of the finger. Research limitations/implications - The implication of this research is that under-actuated robotic hands are appropriate for the missions of grasping different objects. The limitation of the research to date is that issues of sensors, control, and communication have not yet been addressed. Practical implications - Key technologies of the under-actuated finger and TH-3R Hand, with self-adaptive grasping, human-like appearance and low-cost lightweight, are feasible. These technologies have the potential to make a significant impact. Originality/value - These results present a self-adaptive under-actuated grasp concept and a humanoid robotic hand with under-actuated gear-rack mechanism.
机译:目的-本文的目的是介绍设计可用于人形机器人的自适应抓握的机械手的最新工作。常规的机器人设备相对复杂,大型,笨重并且难以安装在人形机器人臂中。欠驱动的机械手使用较少的电动机来驱动更多的旋转关节,从而简化了机械结构,减小了体积和重量,并最终降低了控制难度和成本。设计/方法/方法-设计了一种新颖的欠驱动手指机构,该机构基于齿轮齿条机构,弹簧约束和主动袖中指骨。给出了它的自适应掌握和终端功率掌握的原理分析。根据手指设计了一种新的多指手TH-3R Hand。发现-设计手指机构可用于机械手中,从而使该手通过较少的致动器获得更大的自由度(DOF),并具有良好的形状适应性抓握功能,从而降低了对控制系统的要求。 TH-3R手有五个手指,自由度15。所有手指都是相似的。 TH-3R手具有许多优点:结构简单,重量轻,易于控制且成本低。 TH-3R手可以被动适应所抓物体的不同形状和大小。实验研究证明了手指抓握的自适应性。研究的局限性/含义-该研究的含义是,未充分动作的机器人手适合于抓握不同物体的任务。迄今为止,该研究的局限性在于尚未解决传感器,控制和通信问题。实际意义-手指不足和TH-3R手的关键技术具有自适应抓握,类似人的外观和低成本轻巧的技术是可行的。这些技术有可能产生重大影响。独创性/价值-这些结果提出了一种自适应的欠驱动抓紧概念和具有欠驱动的齿轮齿条机制的人形机器人手。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号