Intelligent Fixture Design through a Hybrid System of Artificial Neural Network and Genetic Algorithm

摘要

In designing fixtures for machining operations, clamping scheme is a complex and highly nonlinear problem that entails the frictional contact between the workpiece and the clamps. Such parameters as contact area, state of contact, clamping force, wear and damage in the contact area and deformation of the component are of special interest. A viable fixture plan must include the optimum values of clamping forces. Along research efforts carried out in this area, this comprehensive problem in fixture design needs further investigation. In this study, a hybrid learning system that uses nonlinear finite element analysis (FEA) with a supportive combination of artificial neural network (ANN) and genetic algorithm (GA) is discussed. A frictional, model of workpart-fixture system under cutting and clamping forces is solved through FEA. Training and querying an ANN takes advantage of the results of FEA. The ANN is required to recognize a pattern between the clamping forces and state of contact in the workpieee-fixture system and the workpiece maximum elastic deformation.. Using the identified pattern, a GA-based program determines the optimum values for clamping forces that do not cause excessive deformation/stress in the component. The advantage of this work against similar studies is manifestation of exact state of contact between clamp elements and workpart. The results contribute to automation of fixture design task and computer aided process planning (CAPP).