...
首页> 外文期刊>Arthroscopy: the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association >Anterior cruciate ligament tunnel placement: Comparison of insertion site anatomy with the guidelines of a computer-assisted surgical system.
【24h】

Anterior cruciate ligament tunnel placement: Comparison of insertion site anatomy with the guidelines of a computer-assisted surgical system.

机译:前十字韧带隧道放置:插入部位解剖与计算机辅助手术系统指南的比较。

获取原文
获取原文并翻译 | 示例
           

摘要

PURPOSE: With the development of computer-assisted surgery (CAS) systems, the surgeon's ability to operate a CAS planning station will become essential. For example, default parameters in computed tomographic (CT) data are being used to place tunnels in anterior cruciate ligament (ACL) reconstruction. The goal of this study was to compare the location of the insertion sites in ACL reconstruction anatomically, via roentgenographic images and via CT scan data and to validate these tunnel placement parameters. Type of Study: Cadaveric analysis. METHODS: Eight human cadaveric knees were marked with 6 copper wires 1 mm in diameter around the circumference of the insertions of the ACL. Using lateral roentgenograms and CT scans that were subsequently transferred to the CAS planning station, the tunnel locations were determined. These were based on a distance from the back of the condyle (location A) and from the roof of the notch (location B) on the femur and on a distance posterior from the tuberosity to theposterior margin along the tibial plateau, which is set as the CAS planning station's default. Locations according to roentgenograms and CT scans were then compared and the accuracy of the CAS planning station was assessed. RESULTS: Comparison of roentgenograms and CT revealed a femoral insertion at 27.5% +/- 3.2% and 26.9% +/- 3.5% (roentgenograms) and 26.6% +/- 1.9% and 26.3% +/- 2.4% (CT), respectively. The CAS planning station provided a tunnel location that was 1.3 +/- 1.0 mm (0.3 to 2.5 mm) away from the actual femoral ACL insertion. The tibial tunnel was placed according to the copper wire markers and was found to be at 46.2% +/- 2.8% (roentgenograms) and 45.4% +/- 2.1% (CT). No statistical differences between position in CT and roentgenograms could be detected (P >.05). CONCLUSIONS: The compared methodologies showed similar locations of the ACL insertions, assuring accurate preoperative planning with the CAS system. However, the CAS system requires adjustment to each individual knee anatomy.
机译:目的:随着计算机辅助手术(CAS)系统的发展,外科医生操作CAS计划站的能力将变得至关重要。例如,计算机断层扫描(CT)数据中的默认参数用于将隧道放置在前交叉韧带(ACL)重建中。这项研究的目的是通过X线照片和CT扫描数据从解剖学角度比较ACL重建中插入位点的位置,并验证这些隧道的放置参数。研究类型:尸体分析。方法:在ACL插入物周围,用6条直径1 mm的铜线标记八个人的尸体膝盖。使用横向X线照片和CT扫描,随后将其传输到CAS规划站,确定了隧道位置。这些是基于距from骨后部(位置A)和距股骨上凹口的顶部(位置B)的距离以及沿胫骨平台从结节到后缘的距离,该距离设置为CAS规划站的默认设置。然后比较根据X线照片和CT扫描的位置,并评估CAS规划站的准确性。结果:对比X线检查和X线照片显示股骨插入在27.5%+/- 3.2%和26.9%+/- 3.5%(X线检查)和26.6%+/- 1.9%和26.3%+/- 2.4%(CT),分别。 CAS规划站提供的隧道位置距离实际股骨ACL插入距离为1.3 +/- 1.0毫米(0.3到2.5毫米)。根据铜线标记放置胫骨隧道,发现其位于46.2%+/- 2.8%(放射线照片)和45.4%+/- 2.1%(CT)。在CT和X线照片上的位置之间没有统计学差异(P> .05)。结论:比较的方法显示了ACL插入的相似位置,从而确保了CAS系统的准确术前计划。但是,CAS系统需要对每个单独的膝盖解剖结构进行调整。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号