...
首页> 外文期刊>Chemical Engineering Science >Dynamics of droplet breakup and formation of satellite droplets in a microfluidic T-junction
【24h】

Dynamics of droplet breakup and formation of satellite droplets in a microfluidic T-junction

机译:微流体T交界处液滴分解的动态及卫星液滴的形成

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Dynamics for droplet breakup with tunnels and formation of satellite droplets in a symmetric microfluidic T-junction are investigated using a high-speed digital camera. The breakup process of droplet could be divided into four sequential stages: squeezing, transition, pinch-off, and thread rupture stages. Effects of the viscosity ratio of both phases lambda, the capillary number of the continuous phase Ca-c, and the dimensionless droplet length l(0)/w(c) on the breakup process of droplet are analyzed. In the squeezing stage controlled by squeezing pressure, the variation of the minimum width of the droplet neck with time could be scaled as a power-law relationship with exponent related to lambda and l(0)/w(c). The transition stage is dominated by the velocity of the fluid, and the pinch-off stage is mainly driven by the capillary force. For these two stages, the evolution of the minimum width of the droplet neck with the remaining time could be described as other power-law relationship with exponent related to lambda. In the thread rupture stage controlled by viscous stresses of both phases and the surface tension, the minimum width of droplet neck decreases linearly with time, and the coefficient of the linear function depends on lambda. Additionally, for the formation of satellite droplets, the size of satellite droplet increases with the increase of superficial velocity of the fluid and droplet viscosity. Furthermore, a critical capillary number 0.03 is observed in low viscosity of the droplet, which divides the variation of the size of the main satellite droplet with the capillary number into constant area and growth zone. (C) 2018 Elsevier Ltd. All rights reserved.
机译:使用高速数码相机研究了用隧道与隧道突破和卫星液滴形成的动力学进行研究。液滴的分解过程可分为四个顺序阶段:挤压,过渡,捏合和螺纹破裂阶段。分析了λ,连续相Ca-c的磷脂毛细管数的粘度比和无量纲液滴长度L(0)/ w(c)的影响。在通过挤压压力控制的挤压阶段中,液滴颈部的最小宽度的变化可以作为与Lambda和L(0)/ w(c)相关的指数的动力律关系来缩放。过渡阶段由流体的速度主导,并且夹紧阶段主要由毛细力驱动。对于这两个阶段,可以将液滴颈部最小宽度的演变与剩余时间的延伸和与与λ相关的指数的其他权力关系描述。在由两个相和表面张力控制的透明应力控制的螺纹破裂阶段,液滴颈部的最小宽度随时间线性减小,线性函数的系数取决于λ。另外,对于卫星液滴的形成,卫星液滴的尺寸随着流体和液滴粘度的浅表速度的增加而增加。此外,在液滴的低粘度下观察到关键毛细管数0.03,其将主卫星液滴的大小的变化与毛细数分成恒定区域和生长区。 (c)2018年elestvier有限公司保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号