首页> 外文期刊>Journal of Virological Methods >Effect of bacterial nanocellulose post-synthetic processing on powders and rehydrated suspensions characteristics
【24h】

Effect of bacterial nanocellulose post-synthetic processing on powders and rehydrated suspensions characteristics

机译:细菌纳米纤维素后合成加工对粉末和再水化悬浮液特性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Bacterial nanocellulose (BNC) is synthetized as hydrated sheets difficult to mix or store and commercialize. Therefore, to incorporate in food matrices, BNC should be previously processed to obtain powders easily resuspended, which are able to impart structure and stability. This work evaluated the viscoelastic and structural behavior of rehydrated BNC suspensions (1%) obtained from different post-synthetic treatments (ground, acid hydrolysis, ultrasound), compared with their respective suspensions before freeze-drying. Suspensions showed strong-gel behavior before and after rehydration but with a marked decrease in viscoelastic moduli of the latter (grounded: around 10 times; hydrolyzed: more than 102 times). X-ray, FTIR, scanning electron microscopy, and light scattering were also applied. Hydrolysis produced an increase in powders crystallinity (from 71% to 89%), and ultrasound a BNC fibers bonding (average particle size increased: 8%); those modifications could hinder water migration into the porous BNC structure and explain the final rheological behavior.
机译:合成细菌纳米纤维素(BNC)作为难以混合或存储和商业化的水合片。因此,为了掺入食物基质中,预先加工BNC以获得容易重新悬浮的粉末,其能够赋予结构和稳定性。该作品评估了再水化的BNC悬浮液(1%)的粘弹性和结构行为(1%),与其各自的悬浮液相比,从不同的合成后处理(研磨,酸水解,超声)获得,与其相应的悬浮液相比。悬浮液在再水化之前和之后显示出强凝胶行为,但后者的粘弹性模量显着降低(接地:约10次;水解:超过102次)。还应用了X射线,FTIR,扫描电子显微镜和光散射。水解产生粉末结晶度(71%至89%)的增加,超声波粘合(平均粒径增加:8%);这些修饰可以阻碍水迁移到多孔BNC结构中并解释最终的流变行为。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号