An investigation on the influence of modification parameters on transmission characteristics of planetary gear system

摘要

A new gear tooth modification model of planetary gear system was established by considering the characteristics of tooth longitudinal crowning modification and tooth profile modification. Using this model, the influences of modification parameters on the time-varying mesh stiffness, transmission error, contact spots and dynamic response of the planetary gear system were analyzed through numerical analysis. The results show that tooth profile modification can effectively restrain the mesh stiffness sudden variation in the single and double tooth alternation of both the internal and external mesh pairs, and significantly decrease the transmission error fluctuation. However, longitudinal crowning modification has no marked influence on mesh stiffness sudden variation or transmission error fluctuation. The tooth profile modification can significantly reduce the sudden variation of tooth surface load during gear mesh course. Longitudinal crowning modification can make the tooth surface load evenly distributed in tooth width direction. When the external meshing pairs are modified at the tooth profile individually, the magnitude values of main response resonance peaks of internal meshing pairs have a great reduction, but those values of external meshing pairs change slightly. In the case of tooth profile modification of the internal meshing pairs, the phenomenon is reversed. By contrast with tooth profile modification, longitudinal crowning modification has little influence on the resonance peaks of internal and external meshing pairs.