首页> 外文期刊>The Journal of Bone and Joint Surgery. American Volume >Dislodgment of polyethylene liners in first and second-generation Harris-Galante acetabular components. A report of eighteen cases.
【24h】

Dislodgment of polyethylene liners in first and second-generation Harris-Galante acetabular components. A report of eighteen cases.

机译:第一和第二代Harris-Galante髋臼部件中的聚乙烯衬垫的脱位。 报告18例。

获取原文
获取原文并翻译 | 示例
       

摘要

BACKGROUND: Dislodgment of the polyethylene liner is an increasingly common complication following total hip arthroplasty. The purposes of this study are to present the results in a series of patients with this complication and to analyze the mode of failure. METHODS: Between November 1995 and January 2001, eighteen patients who had had a total hip arthroplasty presented with dislodgment of the polyethylene liner from a Harris-Galante metal acetabular shell. The medical records, radiographs, operative notes, and retrieved components were reviewed. In addition, scanning electron microscopy was used to study the fractured surfaces in a shell that had four broken tines. RESULTS: The components had been in situ for an average of seven years (range, three to eleven years). Seventeen components were second generation, and one was first generation. Symptoms developed spontaneously in sixteen patients, during sexual intercourse in one, and following a fall on the hip in one. Radiographs showed eccentric positioning of the head in all of the hips and broken tines in six. All of the shells were well fixed. Treatment consisted of revision of the shell in four patients, exchange of the liner in four, cementation of a new liner into the shell in seven, and cementation of an all-polyethylene cup in three. The liners had severe damage of the rim. Scanning-electron microscopy of the fractured surfaces of four tines revealed a fatigue pattern. CONCLUSIONS: We believe that, as the liner wears and becomes loose because of an inadequate locking mechanism, progressive micromotion occurs and the load increases on the polyethylene rim until it deforms and/or fractures. Subsequently, nothing prevents the liner from rotating out of the shell. As this mechanism of failure appears to include fatigue failure of the locking tines and wear of the liner, this complication is likely to increase as the components age in situ.
机译:背景:聚乙烯衬垫的脱位是总髋关节置换术后的越来越常见的并发症。本研究的目的是介绍一系列患者的结果,并分析失败模式。方法:1995年11月至2001年1月,18名患有总髋关节成形术的患者,从哈里斯 - 加仑金属髋臼壳中脱位。审查了医疗记录,射线照片,手术说明和检索的组件。另外,扫描电子显微镜用于研究具有四个破碎齿的壳体中的裂缝表面。结果:该组件的原位平均七年(范围,三到十一年)。十七种组成部分是第二代,一个是第一代。在十六名患者中自发发育的症状,在一个中,在一次性性交过程中,并在一个臀部落下臀部。射线照片显示出所有臀部和破碎的尖端的头部偏心定位。所有的壳都固定了很好。治疗组成了四名患者的壳体修订,四个衬里交换,将新衬垫粘合到壳中的七个,并三个全聚乙烯杯中的胶结。衬里的轮辋造成严重损坏。四叉骨折表面的扫描 - 电子显微镜显示出疲劳图案。结论:我们相信,由于衬里磨损并且由于锁定机构不足而变松,发生渐进的微观,并且负载增加在聚乙烯边缘直至其变形和/或裂缝。随后,没有什么能阻止衬里旋转外壳。由于这种失效机制似乎包括锁定尖端和衬里磨损的疲劳失效,因此这种并发症可能随着原位的成分而增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号