Poly(vinylidene fluoride) (PVDF)/potassium sodium niobate (KNN)–based nanofibrous web: A unique nanogenerator for renewable energy harvesting and investigating the role of KNN nanostructures

摘要

>In the recent era, finding renewable energy sources that are environmentally benign the main focus of scientific community around the globe. There is a plenty of renewable energy sources that are currently being researched such as solar power, thermal energy, wind energy, salinity gradients, and kinetic energy. Polymer‐ceramic–based nanocomposite piezoelectric material is known for quite some time for energy harvesting, but the real challenge lies as it requires very high loading of the ceramic part to obtain the required property and thus almost makes the system nonflexible. Developed material needs to be poled later on to use it as an electric energy generator from ambient mechanical movement. This current study is the first time attempt to produce a simple yet unique lightweight energy harvester using polyvinylidene fluoride (PVDF)/potassium sodium niobate (KNN) nanostructures–based nanocomposite flexible fibrous web where the material is in situ poled during its production using an electrospinning setup. At the beginning, various parameters were identified to synthesize and modulate KNN as nanostructural materials having higher aspect ratio, which is intended to provide a unique connection between KNN once these are embedded within the fibrous matrix. The incorporated KNN nanostructure having higher aspect ratio was also found to act as a beta nucleating agent in PVDF matrix and enhances the β‐phase crystal into the resultant fibrous web, which in turn increases the piezoelectric energy‐harvesting capacity manifold as compared with bare PVDF fibrous web. The in situ alignment of the nanostructured KNN (with a minimum loading, 5% only) into the fibrous nanocomposite is another achievement to obtain higher output. X‐ray diffraction and Fourier transform infrared analysis confirmed the mixture of α‐ and β‐crystalline phase of pure PVDF, which gets converted into β phase once KNN nanostructures are incorporated inside the nanofibrous web. An output voltage of 1.9?V was obtained from PVDF/KNN nanocomposite–based web, which is significantly higher (38 times) than generated voltage (50?mV) from the pure PVDF nanoweb without any subsequent poling operation.