首页> 外文期刊>Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers >Breakup and coalescence regularity of non-dilute oil drops in a vane-type swirling flow field
【24h】

Breakup and coalescence regularity of non-dilute oil drops in a vane-type swirling flow field

机译:叶片式旋流场中非稀释油滴的分解和聚结规律

获取原文
获取原文并翻译 | 示例
           

摘要

In this work, in order to investigate the behavior of non-dilute drops, including breakup, coalescence and trajectory, in a 100-mm inner-diameter horizontal swirling flow field with low inlet mixture velocity, both an experimental study and numerical simulation were conducted. Inlet oil phase concentration was under 3.0% volume fraction, with an inlet flow rate ranging from 12 m(3)/h to 18 m(3)/h. Malvern RTsizer and Electrical Resistance Tomography were applied for measuring the drop size distribution and oil phase concentration, respectively. Correspondingly, numerical simulations applying a Renormalization-group k-epsilon turbulent model, coupled with a Discrete Phase Model simulating oil phase, were conducted as well. The results showed that small drops in the flow field tended to coalescence, while the behavior of large drops was determined by the inlet flow rate. A higher inlet flow rate led to a thinner oil core with constant inlet oil concentration. Moreover, the simulation results, which corresponded well with the experimental observations, presented oil drops distribution laws of breakup, coalescence and trajectory in a 100-mm inner diameter swirling flow field and established a prediction model in a similar flow field. Finally, regularity of swirling intense distribution and drop-turbulence interaction in a swirling flow field with a low inlet velocity was established. These results provide new information helpful for the design of vane-type separator. (C) 2017 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
机译:在这项工作中,为了研究非稀释液滴的行为,包括分解,聚结和轨迹,在具有低入口混合物速度的100mm内径水平旋流流场中,进行实验研究和数值模拟。入口油相浓度低于3.0%体积分数,入口流速范围为12μm(3)/ h至18m(3)/ h。施用了Malvern RTSizer和电阻断层扫描,用于测量滴尺寸分布和油相浓度。相应地,还进行了应用重整化-K-epsilon湍流模型的数值模拟,以及模拟油相的离散相模型。结果表明,流场中的小滴倾向于聚结,而大滴的行为由入口流速确定。更高的入口流速导致具有恒定入口油浓度的较薄的油芯。此外,与实验观察相对应的仿真结果,呈现油滴分裂,聚结和轨迹在100mm内径旋转流场中的轨迹,并在类似流场中建立了预测模型。最后,建立了具有低入口速度的旋转流场中旋转强烈分布和滴湍流相互作用的规律性。这些结果提供了有助于设计叶片式分离器的新信息。 (c)2017年化学工程师机构。 elsevier b.v出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号