...
首页> 外文期刊>Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers >Ultrasound-assisted extraction of biologically active compounds and their successive concentration by using membrane processes
【24h】

Ultrasound-assisted extraction of biologically active compounds and their successive concentration by using membrane processes

机译:超声辅助通过使用膜方法辅助生物活性化合物及其连续浓度的提取

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Sideritis scardica and Sideritis syriaca are considered highly valuable plant materials and their total polyphenols (TP) and total flavonoids (TF) extracts can be employed in nutraceutics and cosmetics. A two-step process was proposed consisting in the ultrasound-assisted extraction (UAE) and concentration of the biologically active compounds via nanofiltration (NF). An extensive comparison between UAE and conventional high-temperature stirring was performed, taking into account the effect of process parameters such as solvent, temperature and ultrasonication. In terms of radical scavenging activity and time optimization, UAE was found more effective, providing - after only 1 h - extraction yields comparable to 20 h of the conventional thermo-mechanical method. The extract was then concentrated by nanofiltration in tangential mode at 20 bar using 300 and 500 Da cut-off Duramem membranes. Permeate and rejection flux was monitored during the filtration process. The lower molecular weight membrane showed higher permeability towards TP and TF and contributed to a more stable flux and lower fouling processes. To predict operational drawbacks, computational fluid dynamic simulations were performed to model the complex rotational flow occurring during membrane filtration. (C) 2019 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
机译:Sideritis Scardica和Sideritis Syriaca被认为是高价值的植物材料,它们的总多酚(TP)和总黄酮(TF)提取物可用于Nutraceutics和化妆品。提出了一种在超声辅助萃取(UAE)和通过纳米过滤(NF)的超声辅助萃取(UAE)和生物活性化合物的浓度组成的两步​​过程。考虑到工艺参数如溶剂,温度和超声波的效果,进行含草和常规高温搅拌之间的广泛比较。在激进的清除活性和时间优化方面,阿拉伯联合物被发现更有效,提供 - 在仅1小时萃取产率之后,与常规热机械方法的20小时相当。然后通过使用300和500Da截止的Duramem膜在20巴的切向模式下通过纳米过滤浓缩提取物。在过滤过程中监测渗透物和排斥助焊剂。较低的分子量膜显示出TP和TF的渗透性较高,并有助于更稳定的助焊剂和较低的污垢过程。为了预测操作缺点,执行计算流体动态模拟以模拟膜过滤期间发生的复旋流量。 (c)2019化学工程师机构。 elsevier b.v出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号