首页> 外文期刊>RSC Advances >Pore structure characteristics and methane adsorption and desorption properties of marine shale in Sichuan Province, China
【24h】

Pore structure characteristics and methane adsorption and desorption properties of marine shale in Sichuan Province, China

机译:中国四川海洋页岩的孔隙结构特征及甲烷吸附和解吸性能

获取原文
获取原文并翻译 | 示例

摘要

Shale gas is one of the most promising resources for unconventional natural gas. Several shale samples were collected from the Silurian Longmaxi Formation in the Yibin region, Sichuan Province, China. The basic geological parameters of the shale samples including total organic carbon, clay mineral content, and vitrinite reflectance were detected. Pore structure characteristics were analyzed with scanning electron microscopy, high-pressure mercury injection, and low-temperature nitrogen and carbon dioxide adsorption methods. Isothermal adsorption and desorption experiments were carried out using gravimetric methods. The isosteric heat of the shale adsorption was calculated using the isothermal adsorption experimental results. According to the experimental results, the shale samples have high maturity, low porosity and penetration. The surface morphological structures include organic pores, clay mineral pores, intergranular pores of authigenic minerals, dissolution pores and micro-cracks. Micropores comprised the majority of the developed pores in the shale samples and play a major role in adsorption processes. The adsorption and desorption results show that the adsorption amount of gas mainly undergoes a rapid increase phase, a slowly rising transition phase and a gentle phase, and desorption hysteresis generally occurs during gas desorption. Adsorption thermodynamics results show that the volume of adsorbed gas decreases with the increase of adsorption temperature and the isosteric heat increases with the increase of the volume of the adsorbed gas.
机译:页岩气是对非常规天然气最有前途的资源之一。几个页岩样品从志留系龙马溪组在宜宾地区,四川省,中国收集。被检测出的页岩样品包括总的有机碳,粘土矿物的含量,和镜质组反射的基本地质参数。孔隙结构特征与扫描电子显微镜,高压汞注射,和低温氮气和二氧化碳吸附的方法进行了分析。等温吸附和解吸试验均使用重量分析法。页岩吸附的等量吸附热是使用等温吸附实验结果计算的。根据实验结果,页岩样品具有较高的成熟度,低孔隙度和渗透率。表面形态结构包括有机毛孔,粘土矿物孔,自生矿物的粒间孔隙,溶解气孔和微裂纹。微孔由多数页岩样品在发达的孔隙和吸附过程中发挥了重要作用。吸附和解吸的结果表明,气体的吸附量主要经历快速增加相位,缓慢上升的过渡相和温和相,和解吸滞后气体解吸期间通常发生。吸附热力学结果表明,吸附气体的体积与吸附温度的升高,并与吸附气体的体积的增加而等量吸附热的增加而减小。

著录项

  • 来源
    《RSC Advances》 |2018年第12期|共8页
  • 作者单位

    China Univ Petr Coll Sci Beijing 102249 Peoples R China;

    China Univ Petr Coll Sci Beijing 102249 Peoples R China;

    China Univ Petr Coll Sci Beijing 102249 Peoples R China;

    China Univ Petr Coll Sci Beijing 102249 Peoples R China;

    China Univ Petr Coll Sci Beijing 102249 Peoples R China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 化学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号