On-line coupled high performance liquid chromatography-gas chromatography for the analysis of contamination by mineral oil. Part 2: Migration from paperboard into dry foods: Interpretation of chromatograms

摘要

Mineral oil hydrocarbons are complex as well as varying mixtures and produce correspondingly complex chromatograms (on-line HPLC-GC-FID as described in Part 1): mostly humps of unresolved components are obtained, sometimes with sharp peaks on top. Chromatograms may also contain peaks of hydrocarbons from other sources which need to be subtracted from the mineral oil components. The review focuses on the interpretation and integration of chromatograms related to food contamination by mineral oil from paperboard boxes (off-set printing inks and recycled fibers), if possible distinguishing between various sources of mineral oil. Typical chromatograms are shown for relevant components and interferences as well as food samples encountered on the market. Details are pointed out which may provide relevant information. Integration is shown for examples of paperboard packaging materials as well as various foods. Finally the uncertainty of the analysis and limit of quantitation are discussed for specific examples. They primarily result from the interpretation of the chromatogram, manually placing the baseline and cuts for taking off extraneous components. Without previous enrichment, the limit of quantitation is between around 0.1. mg/kg for foods with a low fat content and 2.5. mg/kg for fats and oils. The measurement uncertainty can be kept clearly below 20% for most samples.