【24h】

In vitro degradation studies of calcium phosphate glass ceramics prepared by controlled crystallization

机译:受控结晶法制备磷酸钙玻璃陶瓷的体外降解研究

获取原文
获取原文并翻译 | 示例
           

摘要

Calcium phosphate glass ceramics with incorporation of small additions of two nucleating agents, MgO and K2O were prepared in the metaphosphate and pyrophosphate region, using an appropriate two-step heat treatment of controlled crystallization defined by differential thermal analysis results. Identification and quantification of crystalline phases precipitated from the calcium phosphate glass were performed using X-ray diffraction and Rietveld analysis. The beta-Ca2P2O7 (beta-DCP), KCa(PO3)(3), beta-Ca(PO3)(2) and Ca4P6O19 phases were detected in the glass ceramics. In order to evaluate the degradation of the glass ceramics prepared, degradation studies were carried out during 42 days in Tris-HCl solution at 37degreesC, pH 7.4, using granules in the range of 355-415 mum. The materials presented a weight loss ranging up to 12%. The ions leached during the immersion mainly originated from the KCa(PO3)(3) phase, probably due to the presence of K+ ion in the calcium metaphosphate, and the residual glassy phase. The structural changes at the surface of materials during degradation have been analyzed by Fourier transform infrared spectroscopy and X-ray diffraction. Results showed that significant surface changes occurred with immersion time, with the decrease of KCa(PO3)(3), beta-Ca2P2O7 and beta-Ca(PO3)(2) phases occurring at different periods of immersion. This study has demonstrated an easy way to prepared calcium phosphate materials with specific calcium phosphate phases and crystallization, and therefore specific degradation rates. (C) 2003 Elsevier B.V. All rights reserved. [References: 24]
机译:在偏磷酸盐和焦磷酸盐区域中,使用适当的两步热处理(通过差示热分析结果定义),通过控制结晶的适当步骤,制备了掺有少量成核剂MgO和K2O的磷酸钙玻璃陶瓷。使用X射线衍射和Rietveld分析对从磷酸钙玻璃中析出的结晶相进行鉴定和定量。在玻璃陶瓷中检测到β-Ca2P2O7(β-DCP),KCa(PO3)(3),β-Ca(PO3)(2)和Ca4P6O19相。为了评估所制备的玻璃陶瓷的降解,使用355-415微米范围的颗粒,在Tris-HCl溶液中于37℃,pH 7.4下进行了42天的降解研究。这些材料的重量损失高达12%。浸入过程中浸出的离子主要来源于KCa(PO3)(3)相,这可能是由于偏磷酸钙中存在K +离子和残留的玻璃态。已经通过傅立叶变换红外光谱和X射线衍射分析了材料在降解过程中表面的结构变化。结果表明,随着浸泡时间的延长,表面发生了明显变化,在不同的浸泡时间,KCa(PO3)(3),β-Ca2P2O7和β-Ca(PO3)(2)相的减少。这项研究证明了一种制备具有特定磷酸钙相和结晶度以及因此具有特定降解速率的磷酸钙材料的简便方法。 (C)2003 Elsevier B.V.保留所有权利。 [参考:24]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号