首页> 外文期刊>Journal of Materials Chemistry, C. materials for optical and electronic devices >Charge mobility anisotropy of functionalized pentacenes in organic field effect transistors fabricated by solution processing
【24h】

Charge mobility anisotropy of functionalized pentacenes in organic field effect transistors fabricated by solution processing

机译:通过溶液加工制造的有机场效应晶体管中功能化戊烯的电荷迁移率各向异性

获取原文
获取原文并翻译 | 示例
       

摘要

To understand and optimize the performance of thin-film electronic devices incorporating crystalline organic semiconductors, it is important to consider the impact of their structural anisotropy on the charge transport. Here we report on the charge mobility anisotropy in 6,13-bis(triisopropylsilylethynyl) (TIPS) and 6,13-bis(triethylsilylethynyl) (TES) pentacene field effect transistors, in which microstructure is controlled by solution processing conditions. Thin-film structures that range from millimetre size, crystalline domains to macroscopic, high-aspect-ratio (similar to 1 mu m wide and >1 cm long) needles are systematically produced by controlling the substrate displacement rate during zone-cast deposition. Through precise control of the microstructure we experimentally explore the differences in charge transport anisotropy between TIPS-and TES-pentacene molecules. Aligned needles of TIPS- pentacene result in a mobility anisotropy (mu(parallel to) /mu(perpendicular to)) of similar to 20 (mobility of similar to 0.7 cm(2) V-1 s(-1)) whereas TES-pentacene produce an order of magnitude lower mobility (similar to 0.06 cm(2) V (-1) s(-1)) but much higher mobility anisotropy (>45). Such significant changes in absolute mobility and mobility anisotropy are attributed to their different packing structures, which permit 2D charge transport in TIPS-pentacene and 1D transport in TES-pentacene. Bulky TIPS-side groups (diameter similar to 7.5 angstrom) force a brick-wall type packing structure, whereas TES- side groups (diameter similar to 6.6 angstrom) pack in a 1D slipped-stack. Furthermore, through precise control of the molecular alignment, the impact of crystal orientation on charge transport is investigated. TIPS-pentacene achieves the highest mobility when the angle between the needle long-axis and charge transport directions is similar to 35 degrees, whereas in TES-pentacene it is much closer to 0 degrees. These results are supported by theoretical simulations.
机译:为了理解和优化结合了晶体有机半导体的薄膜电子设备的性能,重要的是要考虑其结构各向异性对电荷传输的影响。在这里,我们报告在6,13-​​双(三异丙基甲硅烷基乙炔基)(TIPS)和6,13-​​双(三乙基甲硅烷基乙炔基)(TES)并五苯场效应晶体管中的电荷迁移率各向异性,其中微观结构受溶液处理条件控制。通过控制区域浇铸沉积过程中的基板位移速率,系统地生产了从毫米大小,晶域到宏观,高纵横比(约1微米宽且> 1厘米长)的针状薄膜结构。通过精确控制微观结构,我们实验性地探索了TIPS-和TES-并五苯分子之间电荷传输各向异性的差异。 TIPS-并五苯的对准针导致的迁移率各向异性(mu(平行于)/ mu(垂直于))类似于20(迁移率类似于0.7 cm(2)V-1 s(-1)),而TES-并五苯产生较低数量级的迁移率(类似于0.06 cm(2)V(-1)s(-1)),但迁移率各向异性更高(> 45)。绝对迁移率和迁移率各向异性的显着变化归因于它们不同的堆积结构,从而可以在TIPS-并五苯中进行2D电荷迁移,而在TES-并五苯中进行1D迁移。大体积的TIPS侧基团(直径近似7.5埃)迫使采用砖墙式填充结构,而TES侧基团(直径近似6.6埃)压缩成一维滑动堆叠。此外,通过精确控制分子排列,研究了晶体取向对电荷传输的影响。当针长轴与电荷传输方向之间的角度近似为35度时,TIPS-并五苯具有最高的迁移率,而在TES-并五苯中则更接近0度。这些结果得到理论模拟的支持。

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号