首页> 外文期刊>Journal of Macromolecular Science. Physics >Study of Electrical Conductivity of Para-Toluene Sulfonic Acid Doped Polyaniline/Polyester-Based Polyurethane Blends in the S-Band Frequency Range
【24h】

Study of Electrical Conductivity of Para-Toluene Sulfonic Acid Doped Polyaniline/Polyester-Based Polyurethane Blends in the S-Band Frequency Range

机译:S波段频率范围内对甲苯磺酸掺杂的聚苯胺/聚酯基聚氨酯共混物的电导率研究

获取原文
获取原文并翻译 | 示例
           

摘要

Conducting polymer blends were prepared using polyaniline doped with para-toluene sulfonic acid (PTSA-PANI) and a polyester polyol-based polyurethane (PU). The morphological, thermal and dielectric properties of the PTSA-PANI/PU blends in the frequency range of 1-5 GHz (S band) were investigated. It was found that the morphology of the samples was affected by the PTSA-PANI loading, resulting in the formation of agglomerates and pathways when above 10 wt%. The thermal stability of the composites was improved with increased PTSA-PANI loading. The electrical conductivity percolation threshold was obtained at 2.5% of PTSA-PANI loading and the electrical conductivity reached the value of 0.13 S/m at a PTSA-PANI loading of 30 wt%. The obtained results for the PTSA-PANI/PU blends prepared indicate a high potential for their successful use in electrical and electromagnetic applications.
机译:使用掺杂有对甲苯磺酸的聚苯胺(PTSA-PANI)和聚酯多元醇基聚氨酯(PU)制备导电聚合物共混物。研究了1-5 GHz(S波段)频率范围内PTSA-PANI / PU共混物的形态,热和介电性能。发现样品的形态受PTSA-PANI负载的影响,当高于10wt%时,导致附聚物的形成和路径的形成。 PTSA-PANI含量的增加提高了复合材料的热稳定性。在PTSA-PANI负载量为2.5%时获得电导率渗滤阈值,在PTSA-PANI负载量为30 wt%时,电导率达到0.13 S / m。所制备的PTSA-PANI / PU共混物所获得的结果表明,将其成功用于电气和电磁应用具有很高的潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号