首页> 外文期刊>Journal of Materials Science >Factors affecting the interfacial adhesion of ultrahigh-modulus polyethylene fibre vinylester composites using gas plasma treatment
【24h】

Factors affecting the interfacial adhesion of ultrahigh-modulus polyethylene fibre vinylester composites using gas plasma treatment

机译:气体等离子体处理影响超高模量聚乙烯纤维乙烯基酯复合材料界面粘合的因素

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The interfacial adhesion of ultrahigh-modulus polyethylene (UHMPE) fibre-vinylester composites was improved by the oxygen plasma treatment of the UHMPE fibre. The chemical functional group formations on the UHMPE fibre surface by oxygen plasma treatment were analysed using diffuse reflectance Fourier transform infrared spectroscopy and the morphological changes of the UHMPE fibre surface by plasma etching were observed by scanning electron microscopy. The wettability enhancement by the chemical functional group formation and the mechanical intertocking due to the micropits were important factors in improving the interfacial adhesion of the UHMPE fibre-vinylester composites by oxygen plasma treatment. In order to investigate the relative importance of the two factors, wettability enhancement and mechanical interlocking, in the improved interfacial adhesion of the UHMPE fibre-vinylester composites, nitrogen plasma treatment was also performed. Nitrogen plasma treatment of the UHMPE fibre was proved to be effective in the formation of the micropittings and ineffective in the chemical functional group formation in comparison with the oxygen plasma treatment. The interlaminar shear strengths of the nitrogen-plasma-treated UHMPE fibre-vinylester composites showed almost the same value as those of the oxygen-plasma-treated UHMPE fibre-vinylester composites. The wettability enhancement and mechanical interlocking are important in the improvement of interfacial adhesion of UHMPE fibre-vinylester composites by plasma treatment and mechanical interlocking seems to be more important. (C) 1998 Kluwer Academic Publishers. [References: 22]
机译:超高模量聚乙烯(UHMPE)纤维-乙烯基酯复合材料的界面粘合性通过UHMPE纤维的氧等离子体处理得到了改善。使用漫反射傅里叶变换红外光谱分析了氧等离子体处理在UHMPE纤维表面上形成的化学官能团,并通过扫描电子显微镜观察了通过等离子刻蚀在UHMPE纤维表面上的形态变化。通过化学官能团的形成提高润湿性和由于微孔引起的机械撞击是通过氧等离子体处理改善UHMPE纤维-乙烯基酯复合材料界面粘合的重要因素。为了研究润湿性增强和机械互锁这两个因素的相对重要性,在提高UHMPE纤维-乙烯基酯复合材料的界面粘合力方面,还进行了氮等离子体处理。与氧等离子体处理相比,已证明,UHMPE纤维的氮等离子体处理可有效形成微孔,而在化学官能团形成方面则无效。氮等离子体处理的UHMPE纤维-乙烯基酯复合材料的层间剪切强度几乎与氧等离子体处理的UHMPE纤维-乙烯基酯复合材料的层间剪切强度相同。通过等离子处理,提高润湿性和机械联锁对于改善UHMPE纤维-乙烯基酯复合材料的界面粘合性很重要,机械联锁似乎更为重要。 (C)1998 Kluwer学术出版社。 [参考:22]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号