首页> 外文期刊>Tissue engineering >Photochemical cross-linking for collagen-based scaffolds: a study on optical properties, mechanical properties, stability, and hematocompatibility.
【24h】

Photochemical cross-linking for collagen-based scaffolds: a study on optical properties, mechanical properties, stability, and hematocompatibility.

机译:基于胶原蛋白的支架的光化学交联:对光学性质,机械性质,稳定性和血液相容性的研究。

获取原文
获取原文并翻译 | 示例
           

摘要

Collagen presents an attractive biomaterial for tissue engineering because of its excellent biocompatibility and negligible immunogenicity. However, some intrinsic features related to the mechanical stability and thrombogenicity limit its applications in orthopedic and vascular tissue engineering. Photochemical cross-linking is an emerging technique able to stabilize tissue grafts and improve the physicochemical properties of collagen-based structures. However, other important properties of collagen-based structures and the effect of processing parameters on these properties have not been explored. In this study, we aim to investigate the dose dependence of tensile and swelling properties on two parameters, namely, laser energy fluence and rose Bengal photosensitizer concentration. We also study the compression properties using cyclic compression test, long-term stability using subcutaneous implantation, and hematocompatibility using platelets adhesion test, of cross-linked collagen structures. Moreover, because limited optical penetration in turbid media is the major obstacle for light-based techniques, we also characterize the optical properties, which partially determine the effective optical penetration depth in collagen gel samples, during photochemical cross-linking. Laser energy fluence and rose Bengal concentration are important parameters affecting the cross-linking efficiency, which was characterized as the mechanical and the swelling properties, in a dose-dependent manner. Under the experimental conditions in this study, the peak fluence was 12.5 J/cm2 and the minimal rose Bengal concentration for effective cross-linking was >0.00008% (0.786 micromol). Photochemical cross-linking also enhanced the compression strength and long-term stability of collagen structures without compromising the tissue compatibility. Furthermore, photochemical cross-linking reduced platelet adhesion and abolished fibrin mesh formation, thereby improving the hematocompatibility of collagen structures. These results suggest the feasibility of using the photochemically cross-linked collagen structures for orthopedic and vascular tissue engineering. Finally, the effective optical penetration depth in collagen gel samples is wavelength and rose Bengal concentration dependent, and was approximately 12 mm at 514 nm at 0.001% (9.825 micromol), the rose Bengal concentration mostly used in this study.
机译:胶原蛋白由于其出色的生物相容性和可忽略的免疫原性而成为一种用于组织工程的有吸引力的生物材料。但是,与机械稳定性和血栓形成性有关的某些固有特征限制了其在整形外科和血管组织工程中的应用。光化学交联是一种能够稳定组织移植物并改善基于胶原蛋白的结构的理化性质的新兴技术。但是,尚未探索胶原基结构的其他重要特性以及加工参数对这些特性的影响。在这项研究中,我们旨在研究拉伸和溶胀性能对两个参数的剂量依赖性,这两个参数分别是激光能量通量和玫瑰孟加拉光敏剂浓度。我们还研究了使用循环压缩测试的压缩特性,使用皮下植入的长期稳定性以及使用血小板粘附测试的血液相容性(交联的胶原蛋白结构)。此外,由于混浊介质中有限的光学渗透是基于光的技术的主要障碍,因此,我们还对光学性质进行了表征,该光学性质在光化学交联过程中部分决定了胶原蛋白凝胶样品中的有效光学渗透深度。激光能量通量和玫瑰红浓度是影响交联效率的重要参数,其以剂量依赖的方式表征为机械性能和溶胀性能。在本研究的实验条件下,峰通量为12.5 J / cm2,有效交联的最低玫瑰红浓度为> 0.00008%(0.786 micromol)。光化学交联还增强了胶原蛋白结构的抗压强度和长期稳定性,而不会损害组织相容性。此外,光化学交联减少了血小板的粘附并消除了纤维蛋白网的形成,从而改善了胶原蛋白结构的血液相容性。这些结果表明使用光化学交联的胶原蛋白结构进行骨科和血管组织工程的可行性。最后,胶原蛋白凝胶样品中的有效光学穿透深度取决于波长和玫瑰红浓度,在514%的0.001%(9.825微摩尔)处约为512 mm,该玫瑰红浓度主要用于本研究。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号