A study of droplet transfer behavior in ultra-narrow gap laser arc hybrid welding

摘要

Laser arc hybrid welding became a useful method to weld thick plates. But a sound weld is not so easy to obtain because of the uncontrollability of droplet transfer state, especially in ultra-narrow gap welding process. In this study, V-like ultra-narrow gap welds were carried out using 80 % Ar + 20 % CO2 blend as shielding gas. A high-speed video system was used to observe the droplet transfer behaviors. The results showed that the transfer mode did not change with the same welding current. The transfer mode changed from the short circuiting transfer to the mixture of the short circuiting and the globular transfer and then to spray transfer as the welding current increased. The relationship between the droplet transfer process and the welded defects was studied to obtain high-quality weld joint with a stable transfer process. The optimal parameter window between welding current and groove size was found. Only when the welding current was 200 to 270 A and groove gap was 2 to 3 mm, can a good welded joint be got. Finally, 30-mm-thick plate with 5.49-mm maximum groove gap was welded well by one pass laser autogenous welding and seven passes laser arc hybrid welding process.