In-plane buckling and design of steel tubular truss arches

摘要

Studies on buckling of steel tubular truss arches are lacking in contrast to steel arches with solid web sections, although they have been widely applied in long-span structures. This paper deals with the in-plane elasto-plastic buckling and strength design of circular steel tubular truss arches with triangular sections by using finite element analyses (FEA). Firstly, the in-plane buckling failure modes are explored to reveal the buckling mechanics of truss arches. By introducing the normalized slenderness of the entire arch and the chord tube, as well as the interactive coefficient that accounts for the effect of chord tube buckling, the unified buckling curve for truss arches in uniform compression are obtained. Lastly, an interactive equation is proposed for in-plane buckling resistance of steel tubular truss arches under combined compressive and bending actions. It is found that, the buckling of diagonal web tubes greatly reduces the load-carrying capacity and deformation ability of truss arches hence should be prevented in design. The chord tube deformation always exists during the buckling failure of the truss arch and its effect on the buckling resistance is inevitable. The buckling curvebin the codes can used for truss arches in uniform compression, and the interactive equation can provide satisfactory lower bound predictions for truss arches under general loading.