Helical surface creation by wire electrical discharge machining for micro tools

摘要

In mechanical micromachining, micro tooling is one of the key factors affecting the finished geometrical accuracy and surface quality. To overcome the serious tool wear caused by relatively longer micromachining time, micro tools are usually made of ultra-hard materials such as polycrystalline diamond (PCD) or cubic boron nitride (CBN). Wire Electrical discharge machining (WEDM) is a good choice for efficient fabrications of micro tools made of ultra-hard materials. Considering the traces of wire motions form ruled surfaces, in this paper, typical custom micro milling tools with helical surfaces are generated by ruled surfaces. The simulation shows that the selection of guide lines and generating lines for ruled surface is the key point relating to the final geometrical accuracy and machining efficiency in custom micro tool fabrications by WEDM. Based on the mathematical models built in this paper, overcut can be avoided in the process planning stage for complicated helical surfaces. Furthermore, wire locations can be created conveniently by the introduced mathematical models for post processing in dedicated CAM systems.