Time waveform replication for electro-hydraulic shaking table incorporating off-line iterative learning control and modified internal model control

摘要

In this article, a combined control strategy incorporating off-line iterative learning control and modified internal model control is proposed for improving the time waveform replication performance of electro-hydraulic shaking table. To reduce the modeling error between the estimated inverse model and the actual system, a modified internal model control strategy is first utilized to cope with the modeling error by back absorbing the nominal model and the inverse controller into a direct through block. Due to the non-minimum phase property of the nominal model estimated by the recursive extended least square algorithm, the zero magnitude error tracking controller is exploited to obtain a stable inverse controller. Then, an off-line iterative learning control strategy involving a real-time feedback controller is conducted on the compensated system to further enhance the replication performance. Therefore, the proposed algorithm combines the merits of modified internal model control and off-line iterative learning control and simplifies the conventional iterative control process by eliminating consecutive computation of Fourier and inverse Fourier transforms. The combined strategy is first programmed in MATLAB/Simulink and then compiled to a real-time personal computer with xPC target technology for implementation. Experiment results demonstrate that a better tracking accuracy and a faster convergence rate are achieved with the proposed algorithm than conventional pure iterative learning controller.