Ejection of Electrode Molten Droplet and Its Effect on the Degradation of Insulator in Gas Spark Switches

摘要

Electrode erosion is a notable issue influencing the performance and restricting the lifetime of gas switches. In the erosion process, electrode materials heated by spark channel will melt or evaporate and be driven to depart from electrode surface, contaminating the gas switch insulator, and potentially inducing flashover accidents. In this paper, sputtering spots are observed near the erosion crater in a two-electrode gas switch, which indicates the existence of molten droplet ejection. In addition, a set of polymethyl methacrylate rings are inserted in the gas switch to detect the ejection of molten droplet as well as to simulate the switch insulator for investigating the degradation of surface insulation strength. The results show that the ejection of molten droplet is along the tangent surface of electrode with a small divergent angle. After repeated discharges, the insulator surface is bombarded by the droplet ejection and forms dense cracks and embedded metal particles in a narrow band. The spatial varied droplet ejection causes a decrease in both flashover electric field and surface resistance. It also leads to different surface resistances in different regions, which can result in an uneven electric field distribution. Thus, droplet ejection increases the probability of surface flashover accidents in gas switches.