System Design and Measurements of a 115-kV/3.5-ms Solid-State Long-Pulse Modulator for the European Spallation Source

摘要

In this paper, the results of a 2.88-MW solid-state long-pulse modulator, which has been designed for the new linear collider at the european spallation source in Lund, are summarized. The presented modulator generates an output voltage pulse of 115 kV with a pulselength of 3.5 ms. The main components of the modular system, which include a series-parallel resonance converter, a high-voltage high-frequency transformer, and an output rectifier, are discussed. The modulator design is verified by measurements performed with a full-scale prototype, which is operated under nominal load conditions. A detailed output voltage ripple evaluation is given, and in addition, the system design has been proven by a 7- and 2/3-h heat run test. All specifications are well within the given limits and the maximum occurring temperatures in the transformer stay below 110 °C even under worst case assumptions. The system achieves a pulse efficiency (determined by the pulse shape) of 96.78%, an overall electrical system efficiency of 91.9% and a combined pulse system efficiency of 89%.