首页> 外文期刊>Peer-to-peer networking and applications >Peer startup process and initial offset placement in peer-to-peer (P2P) live streaming systems - Springer
【24h】

Peer startup process and initial offset placement in peer-to-peer (P2P) live streaming systems - Springer

机译:点对点(P2P)实时流媒体系统中的对等启动过程和初始偏移位置-Springer

获取原文
获取原文并翻译 | 示例
       

摘要

We measure and study the peer startup process in P2P live streaming systems and focus on a critical issue in this aspect: How a peer initializes its buffer status when it joins a channel, i.e., initial offset placement of the peer’s buffer in the startup stage. We build a general model of peer startup process in chunk-based P2P streaming systems and present two initial offset placement schemes we inferred from the measurement results of real systems: Fixed padding (FP) scheme and proportional placement (PP) scheme. With FP scheme, the initial buffer offset is simply set to the offset reported by the reference neighbor peer of the new peer plus a fixed padding. With PP scheme, the initial buffer offset is set to the offset of the reference neighbor peer plus an advance proportional to the reference neighbor peer’s offset lag or buffer width. We evaluate the performance of these two schemes, and find that the FP scheme, although simple, is not practical to be adopted in real P2P live streaming systems, and PP scheme is stable when the placement is based on offset lag, but will be unstable when it is based on buffer width if the chunk fetching strategy and neighbor peer selection mechanism are not properly designed. We then report our detailed measurement results of PPLive and UUSee, two popular commercial P2P streaming systems. The measurement results show that PPLive adopts the PP scheme based on buffer width and has good performance. UUSee, however, adopts FP scheme in its early version and has relatively low performance, and it later upgrades to use the PP scheme in its new version and consequently obtains better performance. These results show that initial offset placement is a critical design issue in P2P live streaming systems, and the PP scheme presented in this paper is a good algorithm for this purpose. Our analytical and measurement results could be useful for guiding the analysis and design of buffering protocols for P2P live streaming systems.
机译:我们测量并研究了P2P实时流式传输系统中的对等方启动过程,并着眼于这一方面的关键问题:对等方在加入频道时如何初始化其缓冲区状态,即在启动阶段对等方缓冲区的初始偏移位置。我们在基于块的P2P流系统中建立了一个对等启动过程的通用模型,并提出了两个从实际系统的测量结果推断出的初始偏移放置方案:固定填充(FP)方案和比例放置(PP)方案。使用FP方案时,只需将初始缓冲区偏移设置为新对等方的参考邻居对等方报告的偏移加上固定填充即可。使用PP方案时,初始缓冲区偏移设置为参考邻居对等点的偏移加上与参考邻居对等点的偏移滞后或缓冲区宽度成比例的提前量。我们评估了这两种方案的性能,发现FP方案虽然简单,但在实际的P2P实时流式传输系统中不可行,并且PP方案在基于偏移滞后的位置时是稳定的,但会不稳定当基于缓冲区宽度时,如果未正确设计块获取策略和邻居对等体选择机制。然后,我们报告两个流行的商业P2P流系统PPLive和UUSee的详细测量结果。测量结果表明,PPLive采用基于缓冲区宽度的PP方案,性能良好。但是,UUSee在早期版本中采用FP方案,并且性能相对较低,后来又升级到在新版本中使用PP方案,因此获得了更好的性能。这些结果表明,初始偏移放置是P2P实时流系统中的关键设计问题,而本文提出的PP方案是实现此目的的良好算法。我们的分析和测量结果可能对指导P2P实时流传输系统的缓冲协议的分析和设计很有用。

著录项

  • 来源
    《Peer-to-peer networking and applications》 |2015年第1期|137-155|共19页
  • 作者单位

    1.School of Electronics and Information Engineering Beijing Jiaotong University Beijing 100044 China;

    1.School of Electronics and Information Engineering Beijing Jiaotong University Beijing 100044 China;

    2.College of Engineering and Information Technology University of Chinese Academy of Sciences Beijing 100049 China;

    3.Electrical and Computer Engineering Faculty of Engineering and Applied Science Memorial University of Newfoundland St. John’s NF A1B 3X5 Canada;

    1.School of Electronics and Information Engineering Beijing Jiaotong University Beijing 100044 China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    P2P live streaming Initial offset placement Protocol modeling Offset lag Buffer width;

    机译:P2P实时流式传输初始偏移放置协议建模偏移滞后缓冲区宽度;
  • 入库时间 2022-08-18 02:11:23

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号