首页> 外文期刊>Parallel and Distributed Systems, IEEE Transactions on >Traffic-Aware Relay Node Deployment: Maximizing Lifetime for Data Collection Wireless Sensor Networks
【24h】

Traffic-Aware Relay Node Deployment: Maximizing Lifetime for Data Collection Wireless Sensor Networks

机译:流量感知中继节点部署:最大化数据收集无线传感器网络的生命周期

获取原文
获取原文并翻译 | 示例

摘要

Wireless sensor networks have been widely used for ambient data collection in diverse environments. While in many such networks the nodes are randomly deployed in massive quantity, there is a broad range of applications advocating manual deployment. A typical example is structure health monitoring, where the sensors have to be placed at critical locations to fulfill civil engineering requirements. The raw data collected by the sensors can then be forwarded to a remote base station (the sink) through a series of relay nodes. In the wireless communication context, the operation time of a battery-limited relay node depends on its traffic volume and communication range. Hence, although not bounded by the civil-engineering-like requirements, the locations of the relay nodes have to be carefully planned to achieve the maximum network lifetime. The deployment has to not only ensure connectivity between the data sources and the sink, but also accommodate the heterogeneous traffic flows from different sources and the dominating many-to-one traffic pattern. Inspired by the uniqueness of such application scenarios, in this paper, we present an in-depth study on the traffic-aware relay node deployment problem. We develop optimal solutions for the simple case of one source node, both with single and multiple traffic flows. We show however that the general form of the deployment problem is difficult, and the existing only connectivity-guaranteed solutions cannot be directly applied here. We then transform our problem into a generalized version of the Euclidean Steiner Minimum Tree problem (ESMT). Nevertheless, we face further challenges as its solution is in continuous space and may yield fractional numbers of relay nodes, where simple rounding of the solution can lead to poor performance. We thus develop algorithms for discrete relay node assignment, together with local adjustments that yield high-quality practical solutions. Our solution has been evaluated through both numerica-n-nl analysis and ns-2 simulations and compared with state-of-the-art approaches. The results show that for all test cases where the continuous space optimal solution can be computed within acceptable time frames, the network lifetime achieved by our solution is very close to the upper bound of the optimal solution (the difference is less than 13.5 percent). Moreover, it achieves up to 6-14 times improvement over the existing traffic-oblivious strategies.
机译:无线传感器网络已广泛用于各种环境中的环境数据收集。尽管在许多这样的网络中,节点是随机大量部署的,但仍有许多应用程序主张手动部署。一个典型的例子是结构健康监测,其中传感器必须放置在关键位置才能满足土木工程要求。然后,可以将传感器收集的原始数据通过一系列中继节点转发到远程基站(接收器)。在无线通信环境中,受电池限制的中继节点的运行时间取决于其通信量和通信范围。因此,尽管不受类似类似土木工程的要求的限制,但必须仔细规划中继节点的位置,以实现最大的网络寿命。部署不仅必须确保数据源与接收器之间的连通性,还必须适应来自不同源的异构流量和主要的多对一流量模式。受到此类应用场景的独特性的启发,本文对流量感知中继节点部署问题进行了深入研究。我们针对一个源节点的简单情况(具有单个或多个流量)开发最佳解决方案。但是,我们显示出部署问题的一般形式很困难,并且现有的仅具有连接性保证的解决方案无法在此处直接应用。然后,我们将问题转换为欧氏Steiner最小树问题(ESMT)的广义版本。然而,由于其解决方案在连续空间中,并且可能会产生少量中继节点,因此,我们面临进一步的挑战,解决方案的简单舍入会导致性能下降。因此,我们开发了用于离散中继节点分配的算法,以及可以产生高质量实际解决方案的局部调整。我们的解决方案已通过numerica-n-nl分析和ns-2模拟进行了评估,并与最新方法进行了比较。结果表明,对于所有可以在可接受的时间范围内计算出连续空间最优解决方案的测试案例,我们的解决方案实现的网络寿命都非常接近最优解决方案的上限(相差小于13.5%)。此外,与现有的流量忽略策略相比,它可实现高达6-14倍的改进。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号