首页> 外文期刊>Optoelectronics, IET >Amplitude jitter of waveforms generated via spectral line-by-line pulse shaping due to CW laser linewidth
【24h】

Amplitude jitter of waveforms generated via spectral line-by-line pulse shaping due to CW laser linewidth

机译:由于CW激光线宽,通过逐行频谱脉冲整形产生的波形的振幅抖动

获取原文
获取原文并翻译 | 示例

摘要

The system model of spectral line-by-line pulse shaping on an optical frequency comb produced by electro-optical modulation of a continuous-wave (CW) laser is presented, and the effect of the laser linewidth on the generated waveforms is investigated through system simulation. Three kinds of phasing-only line-by-line filter are considered. The results show that amplitude jitter is induced by CW laser linewidth, and it becomes prominent when the phase control applied to spectral lines varies rapidly. To keep the induced jitter lower than -20 dB, a CW laser with a linewidth narrower than 100 kHz can be safely employed.
机译:提出了通过连续波(CW)激光器的电光调制产生的光频率梳上的逐行频谱整形的系统模型,并通过系统研究了激光器线宽对所产生波形的影响模拟。考虑了三种仅相位逐行滤波器。结果表明,振幅抖动是由连续波激光线宽引起的,当应用于光谱线的相位控制变化很快时,振幅抖动将变得尤为突出。为了使引起的抖动低于-20 dB,可以安全地使用线宽小于100 kHz的CW激光器。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号