Design of InP DHBT power amplifiers at millimeter-wave frequencies using interstage matched cascode technique

摘要

In this paper, the design of InP DHBT based millimeter-wave(mm-wave) power amplifiers(PAs) using an interstage matched cascode technique is presented. The output power of a traditional cascode is limited by the early saturation of the common-base(CB) device. The interstage matched cascode can be employed to improve the power handling ability through optimizing the input impedance of the CB device. The minimized power mismatch between the CB and the common-emitter(CE) devices results in an improved saturated output power. To demonstrate the technique for power amplifier designs at mm-wave frequencies, a single-branch cascode based PA using single-finger devices and a two-way combined based PA using three-finger devices are fabricated. The single-branch design shows a measured power gain of 9.2 dB and a saturated output power of 12.3 dBm at 67.2 GHz and the two-way combined design shows a power gain of 9.5 dB with a saturated output power of 18.6 dBm at 72.6 GHz.