SU-8 2002 Surface Micromachined Deformable Membrane Mirrors

摘要

This paper describes two surface micromachining processes, i.e., one using a wet-etch release and the other using a dry-etch release, to create deformable membrane mirrors made from a thin film of low-stress SU-8 2002. The mirrors are designed for electronic focus and aberration control in imaging systems, and exhibit a large range of motion and high optical quality. The processes result in free-standing membrane mirrors with in-plane film stress as low as 12.5 MPa while attaining well-defined lithographic features as small as 3 $muhbox{m}$ in a 2.5-$muhbox{m}$-thick film. We achieved a maximum deflection of 14.8 $muhbox{m}$ for a 3-mm $times$ 4.24-mm elliptical boundary mirror, limited by electrostatic pull-in. Using a 3-mm $times$ 4.24-mm mirror, which is designed for operation with a circular beam at 45$^{circ}$ incidence angle, we demonstrate focus control while compensating spherical aberration in an optical microscope over a depth of 137 $muhbox{m}$ using a 50x 0.4-NA objective lens.$hfill$[2012-0039]