Reference-based combined deterministic-stochastic subspace identification for experimental and operational modal analysis

摘要

The modal analysis of mechanical or civil engineering structures consists of three steps: data collection, system identification and modal parameter estimation. The system identification step plays a crucial role in the quality of the modal parameters, that are derived from the identified system model, as well as in the number of modal parameters that can be determined. This explains the increasing interest in sophisticated system identification methods for both experimental and operational modal analysis. In purely operational or output-only modal analysis, absolute scaling of the obtained mode shapes is not possible and the frequency content of the ambient forces could be narrow banded so that only a limited number of modes are obtained. This drives the demand for system identification methods that take both artificial and ambient excitation into account so that the amplitude of the artificial excitation can be small compared to that of the ambient excitation. An accurate, robust and efficient system identification method that meets this requirements is combined deterministic-stochastic subspace identification. It can be used both for experimental modal analysis and for operational modal analysis with deterministic inputs. In this paper, the method is generalized to a reference-based version which is faster and, if the chosen reference outputs have the highest SNR values, more accurate than the classical algorithm. The algorithm is validated with experimental data from the Z24 bridge that overpassing the A1 highway between Bern and Zurich in Switzerland, that have been proposed as a benchmark for the assessment of system identification methods for the modal analysis of large structures. With the presented algorithm, the most complete set of modes reported so far is obtained.