首页> 外文期刊>Materials Science and Engineering. B, Solid-State Materials for Advanced Technology >The appearance of clear ferromagnetism for p-type InMnP:Zn implanted with Mn of 1 at.%
【24h】

The appearance of clear ferromagnetism for p-type InMnP:Zn implanted with Mn of 1 at.%

机译:p型InMnP:Zn注入Mn为1 at。%时出现清晰的铁磁性

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The p-type InP:Zn was prepared by the liquid encapsulated Czochralski method and subsequently implanted with Mn~+ of 5 × 10~(15) cm~(-2). The results of energy dispersive X-ray displayed that the concentration of incorporated Mn into InP:Zn is 1 at.%. The cross-sectional transmission electron microscopy showed that the thickness of Mn-incorporated layer was ~300 nm. For photoluminescence measurements, the Mn-related optical transitions caused by incorporation of Mn were broadly observed at the energy region of 1.034, 0.985, and 0.958 eV. The samples clearly showed ferromagnetic hysteresis loops at 10 K, and the ferromagnetic behavior was observed to persist up to 360 K. Thus, the Curie temperature of Mn~+-implanted InMnP:Zn (Mn ~ 1 at.%) is expected to be above 300 K. It is found that a room-temperature-ferromagnetism of InMnP:Zn can be formed by ion implantation of a relatively low concentration of Mn (1 at.%).
机译:p型InP:Zn是通过液体封装的直拉法制备的,然后注入5×10〜(15)cm〜(-2)的Mn〜+。 X射线能量色散的结果表明,掺入InP:Zn中的Mn浓度为1 at。%。截面透射电镜显示,Mn结合层的厚度为〜300nm。对于光致发光测量,在1.034 eV,0.985 eV和0.958 eV的能量区域广泛观察到由Mn的掺入引起的Mn相关的光学跃迁。样品清楚地显示出在10 K时的铁磁磁滞回线,并且观察到铁磁行为持续到360K。因此,预期Mn〜+注入的InMnP:Zn(Mn〜1 at。%)的居里温度为高于300K。发现InMnP:Zn的室温铁磁性可以通过相对低浓度的Mn(1at。%)的离子注入形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号