Finite-Element Analysis of Stress Concentration in ASTM D 638 Tension Specimens

摘要

Experimental results showed that ASTM D 638 Type Ⅳ flat tension specimens, made of a Nylon-11 matrix containing a large volume concentration of Nd-Fe-B particulates, failed at a location where the straight gage section of the specimen ends and the curved transition region begins. The stress distribution in this specimen was analyzed using the finite-element method, and it was found that there is a stress concentration at this location. The stress distributions in tension specimens with both single- and double-arc transition regions were analyzed and stress concentration factors were calculated. A linear relationship between the magnitude of the stress concentration factor and the ratio of the width in the gage section and the arc radius of the transition region is identified. This study shows that it is possible to reduce the magnitude of the stress concentration factor for the ASTM D 638 Type Ⅳ flat tension specimen by redesigning the specimen geometry without changing its overall size.