首页> 外文期刊>Journal of Oleo Science >Synthesis of Ricinoleic Acid Estolides by the Esterification of Ricinoleic Acids Using Functional Acid Ionic Liquids as Catalysts
【24h】

Synthesis of Ricinoleic Acid Estolides by the Esterification of Ricinoleic Acids Using Functional Acid Ionic Liquids as Catalysts

机译:以功能性酸性离子液体为催化剂,通过蓖麻油酸酯化合成蓖麻油酸酯

获取原文
获取原文并翻译 | 示例
           

摘要

Estolides of ricinoleic acid (RA) have been used as lubricants and pigment dispersant in many industries. In this paper, functional acid ionic liquids (ILs) were firstly used as catalysts to prepare RA estolides by the esterification of RAs in solvent-free system. Different ILs were used as catalysts for the esterification. Effect of reaction variables (IL amount, reaction temperature and reaction time) on the esterification were also investigated and optimized using response surface methodology (RSM). Among all tested ILs, [BSO_3HMIM]TS showed the best performance for the esterification. Arrhenius equation for the esterification was lnV_0=14.897-7558.7/T, and the activation energy (Ea) was 62.84 kJ/mol. A high degree of polymerization with an acid value of 48.0±2.5 mg KOH/g was achieved at the optimized conditions (IL load 12%, reaction temperature 140℃, and reaction time 12 h). The effect of reaction variables on the esterification decreased in the order of catalyst loading of IL > reaction temperature > reaction time.
机译:蓖麻油酸(RA)的雌二醇已在许多行业中用作润滑剂和颜料分散剂。本文首先以功能性酸性离子液体(ILs)为催化剂,通过在无溶剂体系中将RA酯化来制备RA雌二醇。不同的IL被用作酯化反应的催化剂。还研究了反应变量(IL量,反应温度和反应时间)对酯化的影响,并使用响应表面方法(RSM)对其进行了优化。在所有测试的IL中,[BSO_3HMIM] TS显示出最佳的酯化性能。酯化反应的阿伦尼乌斯方程为lnV_0 = 14.897-7558.7 / T,活化能(Ea)为62.84 kJ / mol。在最佳条件下(IL负载为12%,反应温度为140℃,反应时间为12h),获得了高聚合度,酸值为48.0±2.5 mg KOH / g。反应变量对酯化反应的影响按IL>反应温度>反应时间的催化剂负载顺序降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号