首页> 外文期刊>Journal of Materials Science >Combustion synthesis of AlN whiskers
【24h】

Combustion synthesis of AlN whiskers

机译:AlN晶须的燃烧合成

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Long and coarse AlN whiskers comprising more than 80 vol% of the combustion product have been successfully produced through combustion synthesis. Addition of ammonia halides can accelerate the vaporization of Al, and retard the deposition rate of AlN, with the result that the growth of AlN whiskers is markedly promoted. A growth model for a spiral whisker by a helical screw dislocation mechanism, or a combination mechanism of a helical screw dislocation and the VLS process, is proposed. Periodic interactions of vacancies and the tip of a screw dislocation cause the growth of a spiral whisker in the model. Under an atmosphere of supersaturated “AlN vapor,” the growth of whiskers along the axial direction slows down and gradually arrests, due to the limitation of the diffusion distance. A series of deposition sites are then produced at regular, isolated locations along the center line on the prismatic plane, and eventually cause the formation of dendritic whiskers.
机译:通过燃烧合成已成功地生产出占燃烧产物80%(体积)以上的长而粗的AlN晶须。卤化氨的加入可加速Al的汽化,并延迟AlN的沉积速率,结果明显促进了AlN晶须的生长。提出了一种基于螺旋钉位错机理或螺旋钉位错与VLS工艺相结合的螺旋晶须生长模型。空位和螺钉位错尖端的周期性相互作用导致模型中螺旋晶须的生长。在过饱和的“ AlN蒸气”气氛下,由于扩散距离的限制,晶须沿轴向的生长变慢并逐渐停止。然后,沿着棱柱平面上的中心线在规则的隔离位置处生成一系列沉积位点,并最终导致形成树枝状晶须。

著录项

  • 来源
    《Journal of Materials Science》 |2006年第6期|1697-1703|共7页
  • 作者单位

    Department of Mechanical Automotive and Materials Engineering University of Windsor;

    Department of Mechanical Automotive and Materials Engineering University of Windsor;

    Center for Composite Materials Harbin Institute of Technology;

    Center for Composite Materials Harbin Institute of Technology;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号