首页> 外文期刊>Journal of food engineering >Quantitative description of Listeria monocytogenes inactivation kinetics with temperature and water activity as the influencing factors; model prediction and methodological validation on dynamic data
【24h】

Quantitative description of Listeria monocytogenes inactivation kinetics with temperature and water activity as the influencing factors; model prediction and methodological validation on dynamic data

机译:以温度和水分活度为影响因素的单核细胞增生李斯特菌失活动力学的定量描述;动态数据的模型预测和方法论验证

获取原文
获取原文并翻译 | 示例
           

摘要

The microbial evolution in foods over time is governed by process and storage conditions, and product characteristics. Mathematical models that accommodate the effect of both process temperature and product water activity on the microbial inactivation are studied in this research. Explicitly, models based on Arrhenius, response surface and Bigelow type relationships are developed and evaluated. The Bigelow type model revealed to be the most suitable. Experiments with macerated potato inoculated with Listeria monocytogenes were used to estimate associated inactivation parameters. The inactivation parameters, Asym D_(60) = 1.79 min, z = 7.11° and z_(aw) = 0.23 were estimated and could be interpreted microbiologically. The parameter estimation step of the selected model was further developed by adding to it a bias factor and incorporating more microbiological information. At a final step, the complete identified model was used to predict the inactivation kinetics of L. monocytogenes under surface dry heating conditions at holding temperatures of 90 and 100 ℃ and lowering a_w values. The confrontation of model predictions with the corresponding dynamic experimental data worked as a validation step. In summary, the induced heat resistance of L. monocytogenes due to the decreasing a_w is an important microbiological phenomenon expressed through the estimation of the inactivation parameter z_(aw).
机译:食品中微生物随时间的演变受制程和储存条件以及产品特性的控制。在这项研究中,研究了同时适应过程温度和产物水活度对微生物失活的影响的数学模型。明确地,开发并评估了基于Arrhenius,响应面和Bigelow类型关系的模型。 Bigelow型模型显示是最合适的。用浸有单核细胞增生性李斯特菌的浸软马铃薯进行的实验用于估计相关的失活参数。估计失活参数Asym D_(60)= 1.79 min,z = 7.11°,z_(aw)= 0.23,可以通过微生物学解释。所选模型的参数估计步骤通过添加一个偏差因子并结合更多的微生物学信息而得到进一步发展。在最后一步,使用完整的鉴定模型来预测单核细胞增生李斯特氏菌在表面干燥加热条件下(保持温度为90和100℃并降低a_w值)的失活动力学。模型预测与相应的动态实验数据的对峙是一个验证步骤。总之,由于a_w降低而引起的单核细胞增生李斯特氏菌的诱导耐热性是通过估计失活参数z_(aw)表示的一种重要的微生物现象。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号