首页> 外文期刊>Journal of Circuits, Systems, and Computers >NWE CONCEPT OF 3.2-4.8 GHz IMPULSE GENERATOR FOR UWB TRANSMITTER
【24h】

NWE CONCEPT OF 3.2-4.8 GHz IMPULSE GENERATOR FOR UWB TRANSMITTER

机译:用于UWB发射机的3.2-4.8 GHz脉冲发生器的NWE概念

获取原文
获取原文并翻译 | 示例

摘要

A new design of Ultra-Wide band (UWB) generator is described in this paper. The UWB impulse generator circuit is the most essential block in a mono-band UWB transmitter. The proposed ultra wide band impulse generator circuit utilizes the performances of the CMOS technology effectively, it is composed of a voltage controlled oscillator (VCO), and a rectangular pulse generator (RPG) and mixer. The RPG circuit consists of a frequency divider 1/128 circuit, time delay, N-inverters and AND gate function. The impulse UWB generator is based on the rectangular pulse modulated with the aim of generating the UWB impulse signal. This proposed circuit generates an output signal which is defined by the bandwidth of 1.6 GHz at centered frequency of 4 GHz and the limited Power Spectral Density (PSD) is -41.47dBm/MHz. The peak-to-peak amplitude of the UWB impulse signal is 528 mV, the output impulse width of 2 ns and the impulse repetition period (PRP) is 32 ns. The power consumption is about 12.5 mW at 2.5 V voltage supply.
机译:本文介绍了一种新的超宽带(UWB)发生器设计。 UWB脉冲发生器电路是单频带UWB发射机中最重要的模块。提出的超宽带脉冲发生器电路有效利用了CMOS技术的性能,它由压控振荡器(VCO),矩形脉冲发生器(RPG)和混频器组成。 RPG电路由分频器1/128电路,时间延迟,N反相器和“与”门功能组成。脉冲UWB发生器基于调制的矩形脉冲,目的是生成UWB脉冲信号。该提出的电路产生一个输出信号,该信号由中心频率为4 GHz的1.6 GHz带宽定义,而受限的功率谱密度(PSD)为-41.47dBm / MHz。 UWB脉冲信号的峰峰值幅度为528 mV,输出脉冲宽度为2 ns,脉冲重复周期(PRP)为32 ns。在2.5 V电源电压下的功耗约为12.5 mW。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号